Windows 10: MACHINE_CHECK_EXCEPTION & KERNEL_SECURITY_CHECK_FAILURE BSOD

Hi!

I installed a new ssd ( Samsung Evo 860 1 TB) earlier today and I have been getting blue screens ever since. The dump files can be found on the link below. Please let me know if you guys require more information. Thanks in advance.


https://1drv.ms/f/s!AsJ3YkX0x6Y4dzs56zPytJEEUYc

:)

 

MACHINE_CHECK_EXCEPTION BSODS error

Hi Danicela,

Thank you for posting in Microsoft Community. I understand that you are getting the error MACHINE_CHECK_EXCEPTION BSODS be rest assured, we are happy to help you.

Appreciate you for trying to fix the issue by yourself.

There area lot of CPU functions that are disabled in safe mode ( You may use your favorite search engine and perform a search). Let's follow the steps below and try resolving the issue.

First run the hardware and device troubleshooter and check.

• 
  Type troubleshooting in the search bar.
  
• 
  Click view all in the left panel.
  
• 
  Select ‘Hardware and devices' and follow the on-screen instructions.
  

I suggest you to contact your manufacturer and update the BIOS. Machine Check Exception is related to the BIOS. After BIOS is updated, it should be fine.

Hope this post helps. Get back to us for further queries. We are happy to help!

 

Kernel_security_check_failure bsod


A few months back I built my first PC, since then I've intermittently been experiencing BSOD crashes.

My computer crashes to a BSOD with the KERNEL_SECURITY_CHECK_FAILURE error message but I've also rarely had the following BSODs:

• DRIVER_VERIFIER_DETECTED_VIOLATION
• MEMORY_MANAGEMENT
• SPECIAL_POOL_DETECTED_MEMORY

That being said it's nearly always the KERNEL_SECURITY_CHECK_FAILURE error; the other messages haven't happened more than once or twice each.

I've attached the DM Log but I'm fairly new at this so please let me know if there is any other information that would help fix this.

Help me Ten Forums, you're my only help.

Attachment 52025

 

MACHINE_CHECK_EXCEPTION bsod

well i recently built my friend a computer with the following specs

Athlon II x2 250(3ghz),
g.skill 4gb 2x2gb ddr2 1066,
Biostar TA790GX XE AM2+/AM3
OCZ modxstrem Pro 600w

now we put it together no problem, it boots up fine every time. The problem we're having is that i insert the windows vista installation disc and it starts to load but every single time it gets to the end of the loading bar there's bout 2 sec where the screen is blackish n then a BSOD stating this

MACHINE_CHECK_EXCEPTION

now i googled this real quick as i have to go to work and what i found out is that this is usually due to a hardware issue. But wouldn't there be other side affects? i have to go to work but any comments will be greatly appreciated. be back at 9.