Windows 10: macrium backup failed

hello all after months of doing a image backup , today my marcium backup failed , i have tried several times to do a backup, and a



reboot ( before i do the 1809 ) update

any suggestions welcomed

:)

 

Restoring Windows 10 Image using Macrium Reflect


In addition to the above. Here's my suggestion in step by step.
I assume you have Macrium Installed in your current HD and already made a backup copy.

1. Connect your new HD via USB port and boot up.
2. Run Macrium, click on Restore tab then select the Backup Image that you made to restore
3. click on "select a different target disk" then select your new HD as destination
   
   
   
4. Proceed to restore then Shutdown and disconnect the old HD and replace with the new HD
5. Boot up with your new HD.

 

Macrium Free - backup on Nas fail


Hi guys,

if I run a backup on an external usb 3.0 hard drive, Macrium Free create the image of the system drive, but if I scheduled (or manually run) the same backup on a network folder (a raid0 hard drive usb enclosure connected to the usb 3.0 port of my Asus DSL-AC68U wifi router), after some processing, it fails. The log tells that it should be a write problem, the network location not connected, but the folder is stable connected.

Here the screenshot, where you can see the initial process where location is connected, the last message where there's the error, and the folder still connected and writable:







any suggestion about this?

Thanks a lot!

 

What if macrium reflect backup fail


If a drive has important files on it and there is a Macrium backup image that has never been tested what are the steps to perform partition recovery if the drive is no longer bootable? (Windows recovery can not find the drive)
And how could you test the Macrium backup image?