Windows 10: MACRIUM REFLECT - Event ID: 513 Source: "Microsoft-Windows-CAPI2"

I have the Purchased Retail Version of MR6 and have made several successful (NO Failed Yet) of my ENTIRE WIN 10 Computer (Image) onto my USB Seagate 1.5TB External HD.

In the Log I get this: Event ID: 513 Source: "Microsoft-Windows-CAPI2"

What does it mean ?? Looked all over the Internet but didn't find a "Fix" !!

Thanks !!



:)

 

Windows 10 Create System Image gives error

There are at least half-a-dozen decent (and free) image backup applications out there. We have never used the built-in one.

But still curious about this. Is that Event Viewer entry for Event ID: 513 with Source: Microsoft-Windows-CAPI2? Does it still throw the error code (0x80780034)?

 

Create recovery drive does not work

Hi dax1792,

I have not had occasion to look at Event Viewer before.

I had a look, and right at the time of the failure of create recovery there was an entry with Source = CAPI2, Event = 513, just like your comment.

The details are:

AddLegacyDriverFiles: Unable to back up image of binary Microsoft Link-Layer Discovery Protocol. System Error:
Access is denied.

This is not encouraging. If this is due to the PC manufacturer (Dell in my case) software, I wonder if there is any way to fix it.

I'll check to see if Dell can help.

Perhaps Microsoft has a recommendation?

 

See here: http://knowledgebase.macrium.com/dis...in+Windows+8.1

Macrium support in their forum characterizes this as a "benign" event. See Nick's post at Creation of Snapshot hangs in Windows 10

Since you have paid version, you can register at this forum - will need to enter confirmation of paid status to complete registration. If you only want to browse and not post, no need to register.

 

Since I've seen this error for all backups and pointed you to the KB article, I decided to go ahead and follow their process (which I hadn't up until now). The permissions on my registration folder all line up as they say it should. I went ahead to the referred answers.microsoft.com thread and, after making a system restore point, executed from an elevated command prompt:
Code: sc sdset MSLLDP DD;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BG)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;SY)(A;;CCDCLCSWRPDTLOCRSDRCWDWO;;;BA)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;SO)(A;;LCRPWP;;;S-1-5-80-3141615172-2057878085-1754447212-2405740020-3916490453)(A;;CCLCSWLOCRRC;;;SU)SAU;FA;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;WD)[/quote] from szz743's posted step number 4.

I then ran (right click, Run Now) an incremental backup from my backup schedule definition and it completed fine - log shows it did NOT throw the 513 error this time.

 

Thank you for that. Works here, too.

 

You're welcome!

 

Well, it worked long enough for me to set new restore points and run Macrium partial once w/o the error although when Macrium ran its next scheduled partial, the error returned. tried to run the fix again and received "The device is not ready" response in cmd.
I know the 513 is not a critical error, but this seemed to also fix Windows 7 Backup error of not being able to locate drive where it has always stored backups, as well as not being able to set restore points which had seemed to disappear. This is what lead me to obtain free vers of Macrium Reflect. Wind7 reports error 0x80780048 MS says to run sfc /scannow to correct this error. SFC Scannow found zero issues to report which leads back to this fix, which leads me back to this fix.

Also, I have not been able run a Windows 7 backup in over a month. I realize I dont need two backup programs, but believe this may affect otrer process or create other errors, or is this a non issue?


This is what I enter for the corrected MSLLDFP in elevated cmd prompt wordwrap off
D*SadD;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BG)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;SY)(A;;CCDCLCSWRPDTLOCRSDRCWDWO; ;;BA)(A;;CCLCSWRPWPDTLOCRRC;;;SO)(A;;LCRPWP;;;S-1-5-80-3141615172-2057878085-1754447212-2405740020-3916490453)(A;;CCLCSWLOCRRC;;;SU)
with cmd respone of "the device is not ready)
VSS is set to auto although was again stopped, so started, no change

 

I know I jumped on this late a month ago, but, I remain in the same place today.
No windows 7 backup
installed MR6 Free, set to run M - F, has only run 4 of 5 days at best.
Since 10/25 MR has only ran once effectively.
The last windows update again took me off line for a few days, again took office 13 away for a few days, messed with my printer, removed some programs and thumbs, removed the restore points I created manually for the umpteenth time leaving me with none.
I am about to purchase an new external storage device for backup, not sold on a particular one, I have the 4TB G drive but it is the drive that is continually not being located. I do have many large files stored, film and music as I do editing. Find myself burning BD-R 25GB and 50GB at a time and using these for "secure" , I know, backup of files I cannot afford to lose.

I did earlier today install Ashampoo Anti Spy and shut down all 43 available communication options between my computer and MS as well.

So, still floundering folks and could really use a life raft, or a even a huge heavily weighted net seems like not such a bad assist at this point.
Getting ready to connect an old lap[top back up and get to know Linux for the first time, this is getting old. Will do the Linux regardless, it's about time I gave it a whirl.


SORRY about the verbiage, just punchy..

I just ran this from an elevated command prompt:

vssadmin list shadowstorage

which resulted in the fine mess:
Code: Shadow Copy Storage association For volume: (F\\?\Volume{7bc92148-0000-0000-0000-100000000000}\ Shadow Copy Storage volume: (F\\?\Volume{7bc92148-0000-0000-0000-100000000000}\ Used Shadow Copy Storage space: 1.33 GB (0%) Allocated Shadow Copy Storage space: 1.63 GB (0%) Maximum Shadow Copy Storage space: 14.0 GB (3%) Shadow Copy Storage association For volume: (G\\?\Volume{3136f36a-0b77-4ee2-bcc3-b69251f430a1}\ Shadow Copy Storage volume: (G\\?\Volume{3136f36a-0b77-4ee2-bcc3-b69251f430a1}\ Used Shadow Copy Storage space: 243 MB (0%) Allocated Shadow Copy Storage space: 2.97 GB (0%) Maximum Shadow Copy Storage space: 55.9 GB (2%) Shadow Copy Storage association For volume: (E\\?\Volume{97aa1623-0000-0000-0000-800000000000}\ Shadow Copy Storage volume: (E\\?\Volume{97aa1623-0000-0000-0000-800000000000}\ Used Shadow Copy Storage space: 0 bytes (0%) Allocated Shadow Copy Storage space: 0 bytes (0%) Maximum Shadow Copy Storage space: 74.5 GB (2%) Shadow Copy Storage association For volume: (C\\?\Volume{0010dbfa-0000-0000-0000-501f00000000}\ Shadow Copy Storage volume: (C\\?\Volume{0010dbfa-0000-0000-0000-501f00000000}\ Used Shadow Copy Storage space: 0 bytes (0%) Allocated Shadow Copy Storage space: 0 bytes (0%) Maximum Shadow Copy Storage space: 2.22 GB (4%)[/quote] I would be much more comfortable knowing I was having regular backups, even better knowing I had a nice copy of a back up, that is recent. VSS is always getting turned off, sfc showed no issues in need of repair as well as well.
Macrium reports Drive G as Backup Full as well

edit...why the emoji's, I don't use them at all, grrrrrr.

 

heck. i'd even like to know how the darn emojis ended up in my post, .....

 

The forum software is misinterpreting ( then C then : then ) as (C*Smile

If you look at the reply window you can disable smilies if they are a problem.

 

The best way to prevent unwanted parsing of outputs from system tools is the use of the Code Tags

Code:

 ... ... ... 

Code: as this will best show that the content is output from the utility (C:\)[/quote] Just select the text and click the Code Button ... #

Edit

I've have applied the tags to the post to help clarify the output

 

Thanks Mooly and Barman58, extra + for your avatar Barman58, good one, and to the 58, does it have anything to do with the colors Black & Gold?
And, no emoticons either.
Still hit and miss with my backups. Pretty sure it is related toi VSS issues, If I correct them in Macrium prior to a backup, it generally works, but, some dang thing is messing with the shadow copy functiomn and hiding from sfc and DISM.

 

I found Macrium had issues with VSS but no idea if this would fix your issues or not:

Macrium Reflect - Backup Restore - Page 2 - Windows 10 Forums