Windows 10: Many BSOD errors

Hello,


I have a Acer A407U laptop that is giving me many issues.


I had a problem a while back where the wifi would lose connection and I could fix it by restarting laptop but it kept occurring. I then realised it was because the network adapter qualcomm atheros qca9377 wireless network adapter driver driver was not working and getting turned off by windows. I disabled windows from turning it off to save battery but problem still occurred. Disabling and enabling it again always fixes it.


I tried to updata the drivers which updated but didnt fix. I then installed drivereasy and found there was a driver update that windows didn't detect, I installed it but it still didn't work.


Now, sometimes the wifi goes off and then quickly comes back on again. But quite often when the wifi goes off, I get a BSOD.


The error message always varies, from watchdog problem to system thread exception. Every time I analyse the dump file it points to the qualcomm atheros qca9377 wireless network adapter driver as the problem. But it has already been updated, as well as uninstall updates etc.


Just this morning I get a BSOD without the wifi coming off. The error message was new "Memory management". I don't know how to fix this problem and would appreciate some help. Thank you.

:)

 

BSOD - Registry Error

Your BSOD code is 0X000000051

Here's the Google search I did for it: https://www.google.com/search?q=0x0...j5.399j0j7&sourceid=chrome&es_sm=122&ie=UTF-8

There is a hotfix available that might help, https://support.microsoft.com/en-us/kb/810558

This thread makes a few good suggestions too: http://www.sevenforums.com/bsod-hel...dows-7-pro-sp1-registry-error-0x00000051.html

+1 to listing your full system specs, OS version, etc. I did only look at your BSOD log file.

Run a Diskchk /R (I know you already ran one, so you can skip this)

Run SFC /SCANNOW

Report back.

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

7 different BSoD

Hey guys,

I have a serious problem. I make it as short as possible:

• system runs 100 % fine with the 10.12
• updatet to Catalyst 11.1 -> BSoD
• updatet to 11.1 Hotfix -> BSoD
• rollback to 10.12 -> BSoD
• removed ALL AMD files manually, installed 10.12 -> BSoD

• Temps are fine
• no sfc /scannow errors
• no chkdsk errors
• Prime, Furmark all fine
• regardless what driver I install -> BSoD
• I did no hw changes, no OC

Here are my BSoDs I receive:

• 0x0000010e
• 0x1000007e
• 0x0000007e
• 0x0000004e
• 0x0000003b
• dxgmms1.sys
• PFN_LIST_CORRUPT

They all refer to the GPU of course ...

From now on I receive a BSoD every time I try to play a game (especially BC2 and SC II) even if I completely remove the old driver and make a clean install.
Apparently the 11.1 damaged my system irreparable.

Any advice or info would be very much appreciated *Smile