Windows 10: Memory management BSOD resulted in automatic repair loop

Unfortunately, yes. Same problem, with same BSOD regarding CLFS.SYS and error code 0xc000007b.

 

Please follow this post

 

Have tried this, but still does not solve the problem?

Error 0xc0000001 showed up then returned to the original clfs.sys error message.

 

What memory tests did you run? How long/many passes?

 

I ran the dell pre boot diagnostic tests and memdiag from the command prompt and watched the result on screen (limited what I could do in recovery environment).

 

Diagnostic Test

RAM TEST


Run MemTest86+ - Test RAM - Windows 10 Forums



Note



MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

Make a photo of the result and post it.

Addition:
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.

 

Thanks......have set it up and running

 

Test complete.....9 passes, zero errors

 

An issue: mixed memory.

Please remove either of your memory sticks, running mixed memory can cause various of problems that can be difficult to diagnose properly. Please know that it does not matter if your running this setup for a long period.

 

Have run separate tests on each stick of RAM......both passed with no errors.

Tried booting with either stick of RAM individually, no joy.......still get the same error.

 

What chkdsk command did you run before starting this thread?

 

chkdsk /F /R /X on both recovery (f: ) and os (g: )

no errors reported

 

Unfortunately I see no other option than to reinstall Windows.