Windows 10: MEMORY_MANAGEMENT 1a

MEMORY_MANAGEMENT 1a # Any other values for parameter 1 must be individually examined.Arguments:Arg1: 0000000000061941, The subtype of the BugCheck.Arg2: 0000000009767ff4Arg3: 000000000000000fArg4: fffffa0096f15a00Debugging Details:------------------KEY_VALUES_STRING: 1 Key : Analysis.CPU.mSec Value: 2921 Key : Analysis.DebugAnalysisManager Value: Create Key : Analysis.Elapsed.mSec Value: 25839 Key : Analysis.IO.Other.Mb Value: 15 Key : Analysis.IO.Read.Mb Value: 0 Key : Analysis.IO.Write.Mb

:)

 

Memory_Management appears often, and then the PC restarts

These were similar errors as before ( PAGE_FAULT_IN_NONPAGED_AREA (50) and MEMORY_MANAGEMENT (1a) ).

There is a driver, ASACPI.sys , that could be problematic.

If you open "Uninstall or change a program" is there a listing for "ACPI driver for ATK 0110 virtual device"?

 

BSOD problems IRQL_NOT_LESS_OR_EQUAL + MEMORY_MANAGEMENT + PAGE_FAULT_IN_NONPAGED_AREA

Some days when I turn off my PC it happens sequentially these 3 BSOD (IRQL_NOT_LESS_OR_EQUAL + MEMORY_MANAGEMENT + PAGE_FAULT_IN_NONPAGED_AREA). Not necessarily in this order. But the errors are basically one of these.

• I've already done memtest86 and got no errors
  
• SFC /scannow with no errors too
  
• checkdisk with no errors
  

I've checked the error with BlueScreenView and the problem is with the driver ntoskrnl.exe.

Any suggestion of whats going on?

 

My computer randomly blue-screens, with the error message "MEMORY_MANAGEMENT"

The minidump files showed two stop errors - MEMORY_MANAGEMENT (1a) and CRITICAL_STRUCTURE_CORRUPTION (109),

No third party driver was shown to be involved in the crash so the issue is more likely hardware.

The MEMORY_MANAGEMENT error had the Parameter 1 as "0x41792" which is "A corrupted PTE has been detected" which may indicate an issue with the virtual memory.

As suggested in the following link with a similar error check the SATA connections for the hard drive.

http://www.tomshardware.com/forum/id-3206961/me...

Also install the Intel SATA drivers and check for a BIOS update.

Also consider re-seating the physical RAM.