Windows 10: MS Certified Driver for Samsung EVO 970 M.2 Drives

I am finishing a new build with new Win10 Pro Retail Software using Samsung EVO 970 Series Drives. The new Win10 Pro software sees the Drives (which are also seen by the UEFI bios) and tells me to install a new driver for them. I had previously downloaded the current driver (yesterday) from Samsung. I put another USB drive containing this software into another USB port on the computer and selected the Samsung driver (in ".exe" format). After pressing "Enter", Win10 Pro tells me that the this new driver is "not certified" and will not install it into the new build. Samsung says the driver works well. The result is that I have a new build of a new computer system with a new "retail" Win10 Pro 64 that will not install.


Please help me find a way to install Win10 64 so that I can get back to work. Since I am using new M.2 drives and there is no operating system is installed in the computer, is it possible that the new Win10 Pro 64 OS has no drive to install the new driver to and therefore establishes an endless loop? Is it possible I bought a new "Retail" Win10 Pro 64 USB which simply does not have the current programs installed? If this is accurate, how do I get everything to work? "Without the software, it is just a big dumb paperweight."

:)

 

Samsung introduces the Samsung 970 PRO and EVO NVMe M.2 SSDs

Samsung 970 PRO and EVO NVMe M.2 SSDs now available.

Order *Arrow SSD 970 PRO NVMe M.2 512GB Memory & Storage - MZ-V7P512BW | Samsung US

Order *Arrow SSD 970 PRO NVMe M.2 1TB Memory & Storage - MZ-V7P1T0BW | Samsung US


Order *Arrow SSD 970 EVO NVMe M.2 250GB Memory & Storage - MZ-V7E250BW | Samsung US

Order *Arrow SSD 970 EVO NVMe M.2 500GB Memory & Storage - MZ-V7E500BW | Samsung US

Order *Arrow SSD 970 EVO NVMe M.2 1TB Memory & Storage - MZ-V7E1T0BW | Samsung US

Order *Arrow SSD 970 EVO NVMe M.2 2TB Memory & Storage - MZ-V7E2T0BW | Samsung US

 

How to regain all unallocated space on my New Samsung 970 EVO M.2 NVMe drive?

Hello Everyone,

I just now installed a new Samsung 970 EVO NVMe M.2 500GB SSD drive to my system, and cloned all the old information from my old 256GB M.2 SSD to this new one. All went good and my system and Bios sees the New Samsung 970 EVO NVMe M.2 500GB
SSD and it boots to it and runs just Great.

However.. my new Drive is only using the first 250GB like the old drive was. My new drive has 227.30GB of Unallocated space on it.

How can I us all of the New drive??... Is there a Free utility or Paid or can this simple be done in Windows 10 that will allow me to move the unused "unallocated" portion so I can Us my whole 500GB drive??... I tried both EaseUS and Macrium
Free ware with no Luck.

I'm running the newest drivers and Windows 10 1809 x64. And as you can probably tell I'm new to this and would GREATLY appreciate a step by step on how to do this.

Thank-You for your Help in Advance.

 

Samsung 970 EVO PRO NVMe M.2 drivers for new Win 10 Dell 3670

I need drivers for a Samsung 970 EVO PRO NVMe M.2 512 GB drive. The machine the drivers will install on does not have an internet connection for security reasons. Please advise how I can download the driver(s) on another machine and transfer them to the
target Win 10 machine.

Thanks in advance,

Joe