Windows 10: Multiple BSOD codes in a week; after Win10 upgrade

Discus and support Multiple BSOD codes in a week; after Win10 upgrade in Windows 10 BSOD Crashes and Debugging to solve the problem; Hi, I have recently upgraded from Win8 to Win10 (clean install, kept only the non-system data partition). While running Win8 it may have crashed... Discussion in 'Windows 10 BSOD Crashes and Debugging' started by davefin, Aug 7, 2015.

  1. davefin Win User

    Multiple BSOD codes in a week; after Win10 upgrade


    Hi,

    I have recently upgraded from Win8 to Win10 (clean install, kept only the non-system data partition). While running Win8 it may have crashed once or twice in the past year, but nothing major. Since installing Win10 about a week ago, I've had like 6 BSOD's of varying error codes,

    What's weird is that Speccy (and other temperature reporting programs) reports my CPU temperatures really low, and it jumps around a lot (one second it's 30, then 25, 22, 18...) while my room is at a temperature of 28°C. At the same time, the BIOS reports CPU temperatures around 50-55°C, and the rest of the components hover steadily around 30°C.

    I've never overclocked, BIOS says the CPU is not unlocked (and I never messed around with the CPU clocks to begin with), I have the latest GPU drivers (353.62).

    I have done a lot of digging around and WinDbg gives me these errors:




    BugCheck 124, {0, ffffe00057321028, b0800000, 60151}


    Probably caused by : AuthenticAMD


    -----


    BugCheck 1000007E, {ffffffffc0000005, fffff8015d657b93, ffffd001ba7f27e8, ffffd001ba7f2000}


    Probably caused by : dxgmms2.sys ( dxgmms2! ?? ::NNGAKEGL::`string'+1b83 )

    -----

    BugCheck 50, {fffff80000000018, 0, fffff801a25124a2, 2}


    *** WARNING: Unable to verify timestamp for cpuz138_x64.sys
    *** ERROR: Module load completed but symbols could not be loaded for cpuz138_x64.sys


    Could not read faulting driver name
    Probably caused by : cpuz138_x64.sys ( cpuz138_x64+24a2 )









    The PC is not even 2 years old, I really don't want it to be the CPU Multiple BSOD codes in a week; after Win10 upgrade :( The PSU should be fine (it's a 400W and the max calculated requirement for my setup is around 330W).

    I'm pretty sure the PC crashed more times than there are the minidumps, but the 4 that were written are in the attachments.

    Thanks in advance for any help you guys can give me.

    :)
     
    davefin, Aug 7, 2015
    #1
  2. C-aLica Win User

    random Freezing leads to BSOD. I give up.

    Stop code is random.

    like CRITICAL_PROCESS_DIED, BAD_SYSTEM_CONFIG_INFO, DPC_WATCHDOG_VIOLATION..

    I've got multiple BSOD and the stop code is that random.

    right now after multiple debugging the issue, I hypothetically assume it's my nvme fault.

    I've ordered a new nvme drive and gonna retest the system if this will works.
     
    C-aLica, Aug 7, 2015
    #2
  3. Windows Vista rollback option no longer available after less than a week?

    Are you telling us that you "upgraded" a Vista computer to Win10 or...?
     
    PA Bear - MS MVP, Aug 7, 2015
    #3
  4. axe0 New Member

    Multiple BSOD codes in a week; after Win10 upgrade

    Hi davefin,

    I'm very sorry for the delay, there aren't many people in this section.
    Are you still requiring help?
    If so, please use the tool again and upload a new zip file.

    Please fill in your system specsPlease go to this site and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.How to fill in your system specs:

    Multiple BSOD codes in a week; after Win10 upgrade [​IMG]


    Multiple BSOD codes in a week; after Win10 upgrade [​IMG]
     
  5. davefin Win User
    Hi, I thought my system specs were filled in?
    Yeah, I still need help, though the crashes have slowed down a lot, maybe it was just the extreme temperatures back then (which is weird, because all the temperature readings were a-ok)

    My system died on me last week (software issue, not hardware) so I can't do another zip as of now (waiting for a new system), can you look at the original zip or am I out of luck?

    Thanks
     
    davefin, Aug 30, 2015
    #5
  6. axe0 New Member
    Hi davefin,

    Your system specs are indeed filled in, but not for a 100% completely.

    Yes I can, do you have a recovery USB?
     
  7. axe0 New Member
    I see you have used KMSpico, a program to activate windows without a license.
    I recommend you to clean install windows and activate using a valid license.

    KMSpico heavily modifies code in windows that causes problems. For analysts it is really hard to find the causes because of these modified codes and for this reason I won't analyse the dump files.
     
  8. davefin Win User

    Multiple BSOD codes in a week; after Win10 upgrade

    Alright, that's actually already happened.. Well, system refused to boot, had to erase C. I'll be buying a new HDD and a license - I'll post here again when that is done (or when I get another BSOD, so I'm not wasting your time). Should I then update this thread or create another one?

    Thanks for the help


    p.s I updated my specs to the highest detail i could, hope they're satisfactory now
     
    davefin, Aug 30, 2015
    #8
  9. axe0 New Member
    Don't you have some installation media of windows 10?
     
  10. davefin Win User
    I do, but I don't have a license yet, plus I wanna set up the new system with the new HDD already installed, so I can install all my stuff there etc.

    Thanks for being determined to help me, I'll report back in when my new system inevitably crashes on me. *Biggrin
     
    davefin, Aug 30, 2015
    #10
  11. axe0 New Member
    If I remember it correct, you can install windows and activate later, there is some time to enter a license before problems with the license comes.
     
Thema:

Multiple BSOD codes in a week; after Win10 upgrade

Loading...
  1. Multiple BSOD codes in a week; after Win10 upgrade - Similar Threads - Multiple BSOD codes

  2. Random BSOD after upgrading to Win10

    in Windows 10 BSOD Crashes and Debugging
    Random BSOD after upgrading to Win10: Hello Guys, I upgraded to Win10 with massive random BSODs. Im like getting crazy, I updated all drivers manuelly, every little device driver I could found but with no luck. I had Win 7 for several years without a single BSOD but after the upgrade it happens on random. Im...
  3. Multiple BSOD crashes every week

    in Windows 10 BSOD Crashes and Debugging
    Multiple BSOD crashes every week: Hi everyone, I've had a look at some of the forums which seemed to have the same problem as me (perhaps for different/same reasons). Since updating the BIOS manually 3 weeks ago, I've been having multiple BSOD and each time the reason appears to be different. However,...
  4. Multiple Bsods in win10

    in Windows 10 BSOD Crashes and Debugging
    Multiple Bsods in win10: Greetings all. I have been troubled since day 1 of my custom built windows PC experience ever since i first installed Windows 7 and my reasoning being Bsods. I had the same bsods over and over and over again so as the tech savvy person I am I troubleshooted using forums...
  5. BSOD after official win10 upgrade

    in Windows 10 BSOD Crashes and Debugging
    BSOD after official win10 upgrade: So i finally got the msg that win 10 is ready for install, so i pressed installed after the first restart(during install) i got BSOD which was weird. So i went through the rest of the setup and finally windows booted and less than 5 min on use i got another BSOD, then...
  6. BSOD with multiple error codes on HP Spectre360/Win10

    in Windows 10 BSOD Crashes and Debugging
    BSOD with multiple error codes on HP Spectre360/Win10: Hi - First post here. I have been experiencing the BSOD randomly for many months. Sent the computer to HP with no resolution. I am not a gamer like many others who post - I get the BSOD doing simple things like MS Word and basic web browsing. In addition, MS Word and all web...
  7. Multiple daily BSOD since Upgrade to Win10

    in Windows 10 BSOD Crashes and Debugging
    Multiple daily BSOD since Upgrade to Win10: Hi, I am losing my mind and have run out of places to check for help, so hoping someone here can assist: I installed Win 10 on 8/8. Since then receiving the same 2 BSOD multiple times every day, but no indication as to the cause. I have updated every driver I can think...
  8. BSOD after upgrade to Win10/trouble "Resetting" Win10/

    in Windows 10 BSOD Crashes and Debugging
    BSOD after upgrade to Win10/trouble "Resetting" Win10/: A few months back I: Purchased a new Samsung 850 EVO SSHD and also upgraded from Win7 to Win10. After the upgrade I started experiencing seemingly random system lock-ups. They occur one of two ways: 1. happens periodically when the system is left running on the desktop....
  9. regular BSOD after upgrade to Win10

    in Windows 10 BSOD Crashes and Debugging
    regular BSOD after upgrade to Win10: I experience a very frequent BSODs. I've searched the inet for the symptom, everyone blames Alcohool 120%. I've never had it. I attach the system information file with 50 minidumps. I would be thankful if you could help me to identify the reason for these BSODS. Thanks...
  10. Multiple BSOD after upgrading to windows 10

    in Windows 10 BSOD Crashes and Debugging
    Multiple BSOD after upgrading to windows 10: Hi, I have upgraded to Windows 10 (clean install), and I've been getting BSOD saying DRIVER_POWER_STATE_FAILURE. It can happen anytime, but mostly when I'm using google chrome (I am using microsoft edge to post this now). Interestingly enough though, it never ever happened...