Windows 10: Multiple BSOD errors with multiple stop codes

Just built my new pc and I have been experiencing a lot of bsod errors with multiple stop codes. For instance: Stop code: ATTEMPTED WRITE TO READONLY MEMORYStop code: KERNEL SECURITY _CHECK FAILUREStop code: DRIVER IRQL NOT LESS OR EQUAL What failed: NETIO.SYSStop code: SYSTEM_THREAD EXCEPTION NOT HANDLED What failed: portcls.sysStop code: IRQL NOT LESS OR EQUAL What failed: ntoskrl.exeStop code: PAGE FAULT IN NONPAGED_ AREAThose are the bsod errors i am receiving and some say what failed. I’ve reinstalled windows, ran sfc scannow, DISM, and chkdsk.Minidump file i think i did it right

:)

 

BSOD when coming out of sleep, multiple error codes

Thanks for the assistance, I've run all the necessary steps. It looks like there might be an issue found when running that first command. I have also installed all the driver updates recommended by the dell support check.

You can find the logs of the command prompt window in the cmd.log file

cmd logs.txt

 

BSOD with multiple stop codes

• Problem
  

The problem is that I get a blue screen of death (BSOD) frequently for a few months now, and it increases in frequency once I've had the first one. For example, if I leave my computer on for a while, it'll run normally for a few hours before I get my first BSOD. After I get a BSOD, I get a lot more afterward over the period of 30 mins - 1 hour. The stop codes I get are different every time so there's no way of saying which one I get the most.

• Problem history
  

I don't remember exactly when I had this problem or what triggered it. But at the time I hadn't changed any hardware components or installed new software. However, I used to only get the stop code IRQL_NOT_LESS_OR_EQUAL. After some attempts of troubleshooting, I started getting all the stop codes besides IRQL_NOT_LESS_OR_EQUAL to this moment. I don't remember which step exactly of troubleshooting triggered this change though.

• Specs:
  

1. Windows: Windows 10 x64
   
2. Motherboard: Asus Strix B450-F Gaming
   
3. CPU: AMD Ryzen 5 3600
   
4. Memory: Corsair CMK32GX4M2E3200C16 Vengeance LPX 32 GB
   
5. Hard disks: KINGSTON SA400S37240G / WDC WD10EZEX-21WN4A0
   
6. Graphics card: MSI GeForce RTX 3060 GAMING X
   
7. Power supply: don't remember exact model but it's Corsair 550W
   

• Troubleshooting:
  

1. Changed GPU (from GTX 1060 to current)
   
2. Changed RAM
   
3. Turned D.O.C.P off
   
4. Turned D.O.C.P on
   
5. Updated all drivers (chipset, graphics, etc..)
   
6. Updated BIOS
   
7. memtestx86 (no errors)
   
8. CheckHealth
   
9. Updated windows
   
10. Installed fresh windows (wiped everything) and reinstalled all drivers.
    
11. Tried different RAM that I am sure is not faulty
    

• Notes:
  

1. I tried installing fresh windows multiple times and I noticed that every time I get insanely many BSODs before I install the chipset driver. Then it returns to normal frequency as stated in the 'problem' section.
   
2. Every time I check the performance monitor I see the message below or something similar:
   
   
   
   

 

BSOD with multiple stop codes

Problem The problem is that I get a blue screen of death (BSOD) frequently for a few months now, and it increases in frequency once I've had the first one. For example, if I leave my computer on for a while, it'll run normally for a few hours before I get my first BSOD. After I get a BSOD, I get a lot more afterward over the period of 30 mins - 1 hour. The stop codes I get are different every time so there's no way of saying which one I get the most. Problem history I don't remember exactly when I had this problem or what triggered it. But at the time I hadn't changed any hardware components or installed new software. However, I used to only get the stop code IRQL_NOT_LESS_OR_EQUAL. After some attempts of troubleshooting, I started getting all the stop codes besides IRQL_NOT_LESS_OR_EQUAL to this moment. I don't remember which step exactly of troubleshooting triggered this change though. Specs Windows: Windows 10 x64 Motherboard: Asus Strix B450-F Gaming CPU: AMD Ryzen 5 3600 Memory: Corsair CMK32GX4M2E3200C16 Vengeance LPX 32 GB Hard disks: KINGSTON SA400S37240G / WDC WD10EZEX-21WN4A0 Graphics card: MSI GeForce RTX 3060 GAMING X Power supply: don't remember exact model but it's Corsair 550W Troubleshooting replaced GPU (from GTX 1060 to current) replaced RAM Turned D.O.C.P off Turned D.O.C.P on Updated all drivers (chipset, graphics, etc..) Updated BIOS memtestx86 (no errors) sfc /scannow Updated windows Installed fresh windows (wiped everything) and reinstalled all drivers. Tried different RAM that I am sure is not faulty Notes I tried installing fresh windows multiple times and I noticed that every time I get insanely many BSODs before I install the chipset driver. Then it returns to normal frequency as stated in the 'problem' section. v2 log files: OneDrive