Windows 10: Multiple BSOD Errors

Hey guys. Recently I bought a new processor (Ryzen 7) and motherboard (B450 AORUS PRO WIFI) and ever since I installed it I have been getting a lot of blue screens. For example a few stop codes I received are: MEMORY_MANAGEMENT, SYSTEM_SERVICE_EXCEPTION, KMODE_EXCEPTION. I’ve never had the same stop code twice yet. I looked these up and a lot of them were talking about driver updates and what not so I tried updating the drivers I needed to but a lot of them didn’t need to be updated it said. So I just decided to reset my PC completely to get fresh drivers and put everything back to its default settings.

Since then it’s been okay but the one thing I’m noticing is that my front panel USB’s aren’t working correctly. I have a USB 2.0, 3.0 and HD Audio slot on the front panel. They are all plugged in correctly but for example when I plug my headphones into them after about 20 minutes or so the headphones stop working and if I try to disable and enable them in the “sounds” window the window freezes and I’m forced to exit out of it. Also, when I plug in some things to the USBs my PC cant read it at all.

Recently I’ve got multiple BSOD with the stop codes: IRQL_NOT_LESS_OR_EQUAL, KERNEL SECURITY CHECK FAILURE, and SYSTEM SERVICE EXCEPTION(again). I’m just curious if these blue screens all have a common cause between them and if anyone would be able to help find that cause. I can provide more information if needed but I didn’t want to make this post too long. Thanks.

submitted by /u/NoahxDXD
[link] [comments]

:)

 

BSOD when coming out of sleep, multiple error codes

Thanks for the assistance, I've run all the necessary steps. It looks like there might be an issue found when running that first command. I have also installed all the driver updates recommended by the dell support check.

You can find the logs of the command prompt window in the cmd.log file

cmd logs.txt

 

BSOD - Registry Error

Your BSOD code is 0X000000051

Here's the Google search I did for it: https://www.google.com/search?q=0x0...j5.399j0j7&sourceid=chrome&es_sm=122&ie=UTF-8

There is a hotfix available that might help, https://support.microsoft.com/en-us/kb/810558

This thread makes a few good suggestions too: http://www.sevenforums.com/bsod-hel...dows-7-pro-sp1-registry-error-0x00000051.html

+1 to listing your full system specs, OS version, etc. I did only look at your BSOD log file.

Run a Diskchk /R (I know you already ran one, so you can skip this)

Run SFC /SCANNOW

Report back.

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.