Windows 10: Multiple Monitors: Duplicate these displays" not showing under Display tab

Hi. I just added a third monitor to my Windows 10 system. The three are working fine and I can pass files etc across screen. I can duplicate two screens but cannot triplicate the same on all three. I don't bet "Duplicate these displays" under Display on options to duplicate desktop on 1 and 2 and 1 and 3.These are my specs:NameDESKTOP-99HQGAKOS EditionWindows 10 HomeVersion2009OS Build10.0.19043.1237System typeB560I AORUS PRO AXRAM32 GBI am using an Nvidia 3060 graphics card.Any suggestions?BestChris.

:)

 

Multiple display taskbar

Hi Justin,

Let me guide you now on how to set up multiple displays on a Windows 10 computer. You may follow the steps below to configure the correct display settings for your device.

Here are the steps:

• Right-click on your desktop.
• Select Display settings, then different options will be displayed.
  
• You can either choose Duplicate these displays to sync your activities from the original monitor with the second one or
  Extend these displays to be able to do multiple activities using separate displays.
• After choosing your preferred option, click on Apply.

Let us know if you have any further questions.

 

Duplicating multiple Displays

I have been attempting to duplicate three displays. All displays are the same resolution, same refresh rate, same 8-bit color, etc.

All are connected to the same graphics card (Nvidia Quadro P620).

All are using a mini Display Port to HDMI converter with an HDMI cable running to each monitor.

The desktop can be extended to all displays, but there is no option to duplicate the desktop to all displays, only to display 1 and 2 or to 1 and 3.

Two of the displays are listed as Generic PNP Monitors. The other says what the display is actually named.

I have been attempting these options through Windows Display Settings.

 

4870x2 won't display at 1680x1050 at all!

OK. Now I know what ur problem is. Step by step:
1. Go to Catalyst Control Center
2. Click on the word "Graphic" right on top left corner. It will display drop down menu
3. Click on Display monitor and will see the list of monitor at near bottom
4. Right Click the monitor and select "Configure". It will show up the window
5. There will be 3 option to select. Select the middle one and then click on the tab which show the bar with 15%.
6. Drag the bar to max, and the screen will stretch to the native resolution 1680x1050.
7. Also click the tab with showing RGB drop down list and select the last one (it will change to image quality for pc).
That's it. Good Luck.