Windows 10: My keys are typing the wrong keys

I went to get on my school computer EliteBook and found that, somehow over the weekend while it was shut and turned off all weekend, my keys have switched. M is caps lock, 1 is U, 2 is A, 3 is L, etc. It's like this for all the keys except N. I found a similar post, and the help person said to click the windows key and x, but the "HP Software Framework is not installed or not running" I don't know how to fix this, and I can't type commands because the letters are scrambled. Please help

:)

 

at sign in my keyboard keys are typing the wrong letters

Hi Darrell,

Thank you for using Windows 10.

We would require some more information to assist you better:

• Are you facing issues while typing the password?
• Have you clicked on the eye next to password field and checked?
• As you've mentioned that keyboard keys are typing the wrong letters at sign in screen, kindly let us know how are you able to sign in to desktop? Have you used any external keyboard?

You may try installing the keyboard drivers in compatibility mode and check for the issue status. Here is the steps:

• Go to your manufacturer’s website
  and download the Driver’s setup file for your computer.
• Press Windows Key + R on your desktop screen to go to run box.
• Type devmgmt.msc and hit Enter.
• Under Driver, expand, then right click and select
  Uninstall.
• If you are prompted to Confirm then Confirm.
• Go to the location where you had saved your downloaded setup files of the drivers and
  right click, then select Properties.
• Select Compatibility Tab.
• Place a check mark next to Run this program in Compatibility mode and select the operating system accordingly from the drop down list.
• Let the driver to install and then check the functionality.

Keep us informed about the status of the issue and reply with the information and we’ll be happy to help you.

 

How to revoke GTA IV key

It's a very long key on the booklet, so you are saying thats the issue?

 

SSD key type?

Well, that makes it even more confusing, the bottom image showing the drives and listing the protocols they use seems to show the right hand most drive as a M-keyed PCIe x4, which is the same config as my drive, however you can clearly see from my picture the small connector (which should be the 5 pin) only has 3 pins. Also when compared to the image of connector layouts it should be B-keyed.
The drive I have installed is definitely working at PCIe x4 speeds, CrystalDiskMark confirms that so does copying a large file across (50Gb file) copies at approx. 2Gb's.
Also HWInfo64 tells me the PCIe version is 3.0, maximum link width is x4, current link width is x4.
It is very confusing to me as to why HWInfo64 reports the port as "mechanical key B" but all other evidence would suggest it is M-key.
That's the reason for the question, it seems the information is very contradictory.