Windows 10: my PC had a problem logging in now it's in automatic repair and to restore my os ask for...

PC password change using phone

:)

 

Windows won't reset or restore, Automatic repair loop

Hi Bruno,

When the Automatic repair fails, we can suggest using the command prompt from Windows 10 Boot Options menu to run bootrec commands to fix the files the Auto Repair couldn't. Here are the steps:

• On the windows Recovery Option, choose Troubleshoot >
  Advanced Options.
• Select Command Prompt.
• Enter the following commands in the Command Prompt:

• bootrec.exe /rebuildbcd
• bootrec.exe /fixmbr
• bootrec.exe /fixboot

Once the repair is done, restart your PC and check if the issue is resolved. Let us know the outcome, so we could provide further assistance as necessary.

We'll keep an eye out to your response.

 

HELP! Windows 10 automatic repair couldn't repair PC. Details below

Hi Matthew,

As you are facing issue withAutomatic Repair, we would assist you for sure.

In order to understand the issue in a better manner, please share the following details

• 
  I tried system restore” What is the error exact error message you received?
  

If automatic repair fails, you may try to repair them using these commands through Command Prompt under Advanced Options. Follow the steps:

Since you have done most of the troubleshooting steps, I would suggest you to try repairing the Boot Configuration Data through the command prompt by following the steps below and check if it helps.

I suggest you re-built the boot record by following the below commands and check if it helps.

You will have to use Windows 10 installation media to follow the steps to boot into Recovery Environment and try to rebuild BCD.

Step 1: I suggest you to create an installation media for
Windows 10 using the media creation tool:

Installing Windows 10 using the media creation tool

Step 2: After preparing the installation media, insert it hard reboot the device and follow the below:

• Boot into Windows Recovery Environment using the Windows 10 installation media.
• Click on Repair your computer.
  
• Click on Troubleshoot and in the advanced options.
• Select Command Prompt. Type the following commands into the prompt and press Enter key after each command.

• 
  bootrec /fixmbr
  
• 
  bootrec /fixboot
  
• 
  bootrec /scanos
  
• 
  bootrec /rebuildbcd
  

5. Restart the computer.

NOTE: Modifying BIOS/ complementary metal oxide semiconductor (CMOS) settings incorrectly can cause serious problems that may prevent your computer from booting properly. Microsoft cannot guarantee that any problems resulting
from the configuring of BIOS/CMOS settings can be solved. Modifications of the settings are at your own risk.

Hope it helps. Reply to the post with an updated status of this issue for further assistance.

Thank you.

 

Automatic Repair Advanced Options

You may wish to find a friend to help you. Fixing things can be daunting first time round. What I suggested is far more appropriate - consider - if your disk is faulty (it may not be) - you'd be wasting your time restoring image backups. So checking it is your first priority. If ok: This is the most straightforward of those steps:

a. run Macrium Reflect on another PC b. insert a blank flash drive c. Click here:

Now plug that disk into your problem PC and boot it from that external disk. Use this option:

There are Youtube videos too. There. That's one of them in some detail for you.