Windows 10: My pc is in an unbootable state

I don't know what to do Every time I try launch I will see the Asus logo for a few seconds followed by a dark blue screen. Is there a way I can factory reset from outside of the pc? I was trying all night and I kept giving me error after error why it couldn't.

submitted by /u/LETTUCEDRAG0N
[link] [comments]

:)

 

Unbootable pc after firmware update

Unbootable pc after firmware update.

 

Computer end in unbootable state after every reboot

Hi,



Thank you for posting your question in the Microsoft Community



Are you getting any error message?



I recommend you to unplug eternal devices and check if the computer boots to the desktop.



Step 1: Safemode

1. Press Windows logo key Windows logo key+ I on your keyboard to open Settings.
   
2. Select Update & security > Recovery.
   
3. Under Advanced startup, select Restart now.
   
4. After your PC restarts to the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings > Restart.
   
5. After your PC restarts, you'll see a list of options. Select
   4 or F4 to start your PC in
   Safe Mode.
   
6. Click the "Power" icon and click "Restart" from the menu that appears. Your computer will reboot into the normal operating mode.
   
7. If the safe mode words, I suggest you to check in clean boot.
   

Step 2:
Clean boot



Here is the link for the
clean boot, follow the steps based on the results that you get.



Disclaimer: A “clean boot” starts Windows with a minimal set of drivers and startup programs, so that you can determine whether a background program is interfering with your game or program.



Please reply back with the required information in order to help to fix the issue.





Hope it helps.



Mithin EJ

Microsoft Community – Moderator

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??