Windows 10: My PC is stuck in a bootloop after factory reset

My PC is stuck I'm a boot loop after I put in the time, keyboard layout, Etc. I don't have access to safe mode or that menu. I only have bios. It says just a moment with a black screen and loading symbol then it turns black and after like 2 seconds it reboots back to the hi there screen.

:)

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

Stuck during factory reset.


So the Factory reset has been stuck at 2% for the last 8 hours.

 

Stuck on factory reset

Hello forums, good evening/morning/day. I’ve recently factory reset my pc due to it being slow. Yet its stuck on 77% and hasn't gone up for ages now. Any suggestions or do I just have to wait?