Windows 10: my pc keeps resetting. wondering if any1 can fix my issue

so a for a while my pc keeps resetting and i have reinstalled windows multiple times. before it would just reset but now im getting a dpc watchdog violation. i have looked online but nothing has been working i checked the event viewer and this is what i got.

The computer has rebooted from a bugcheck. The bugcheck was: 0x00000133 (0x0000000000000000, 0x0000000000000501, 0x0000000000000500, 0xfffff8016766c378). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: 3eaa9c3f-52e3-4ff3-9f10-a8b52cccbf2f.


dont know if that helps but someone help me im tired of not knowing what the problem is

:)

 

resetting the pc

Hi,

There is a possibility that this is due to software corruption. To properly isolate the issue, kindly verify the following:

• Have you performed Reset this PC option?
• Did you encounter any error messages?
• Any recent changes made on the computer prior to the issue?
• What troubleshooting steps have you done to fix the issue?
  

We're looking forward to your response.

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

N73/Pc Suite issues

Hello to all, just wondering if some1 could help us.

Pc Suite connects to our phone and we can move music etc to and from phone and pc, but when we go on to nokia software updater it only gets to step 2(preparing udate- searching for connected phone) and stays on that for as long as we leave it. we've changed
the cable to different usb ports, unloaded and reloaded pc Suite/updater and still no luck, Also reloaded all of pc and still no good, any suggestions any1????

We are using,-

windows Xp

Service pk2

Cable

pc suite 6.82.22.0

Cheers

Keith-carrie