Windows 10: My pc won’t display anything on my tv

I have tried changing the cpu, gpu and ram and even a new motherboard but nothing works

:)

 

My pc won't display to my tv after upgrade.

This might help: https://support.vizio.com/s/article/My-computer-won-t-display-on-my-TV

 

Laptopc can´t connect to TV

Hi,

Please reply to the questions mentioned below in order to assist you in a better way.

• Are you connecting the PC and TV using a HDMI cable?
• Did you make any changes prior to the issue?

I suggest you to try the steps below and check if it helps.

• First you need a video cable for making the physically connection. For better picture quality, you should connect the computer to the TV using standard VGA ports or via the DVI to HDMI cable provided your TV supports these ports.
• Open the "display settings" in your computer and activate output to the TV screen. You can either mirror content of your computer on the TV or extend the display just like a dual monitor screen.
• Pick up your TV remote and switch to "External Inputs" from the menu. You will need to change the default "Video 1" to a different selection which may be "HDMI 1" or "Video 2" depending on how you have made the connection.

Important: Make sure you connect the cable to the TV before turning on the computer as sometimes it may fail to recognize external display.

You may also need to change the screen resolution of your TV using the Display settings in your Control Panel else the picture may appear distorted.

Please revert if you face any issues with PC not connecting to TV.

 

4870x2 won't display at 1680x1050 at all!

OK. Now I know what ur problem is. Step by step:
1. Go to Catalyst Control Center
2. Click on the word "Graphic" right on top left corner. It will display drop down menu
3. Click on Display monitor and will see the list of monitor at near bottom
4. Right Click the monitor and select "Configure". It will show up the window
5. There will be 3 option to select. Select the middle one and then click on the tab which show the bar with 15%.
6. Drag the bar to max, and the screen will stretch to the native resolution 1680x1050.
7. Also click the tab with showing RGB drop down list and select the last one (it will change to image quality for pc).
That's it. Good Luck.