Windows 10: My unusual setup fails: 2 different NVMe system drives

Hey there,

i'm trying to get this special kind of system setup:
2 different NVMe system drives, that occasionally i'll take one of them out of the pc, pysycally, while at this time, the pc will boot from the other system drive.

I bought this PCI to NVMe adapter: 3 in 1 mSATA M.2 PCIE NVMe SSD to PCI E 3.0 4X SATA 3.0 Adapter Card for M2 NVMe AHCI SATA mSATA Solid State Disk Converter|Add On Cards| - AliExpress

Whenever an ssd drive is connected through the pci adapter -the operation system cannot load. most of the times it resets the pc right after windows's welcome screen.
Also, when trying to install a fresh install of windows to the ssd drive while it's connected through the pci adapter, it resets on the installion process.

I tried to install windows on the same ssd drive while the ssd connected directly to the mother board, without the pci adapter. this is the only way i can install windows.

the same ssd drive works perfectly while connected directly to the mother board.

Is it a faulty adapter? or is there some setting i can change?

videos:
Reset while loging in to windows:
Oops, something lost while log on with PCI to NVMe adapter.mp4
Reset while installing windows:
Oops, something lost while install windows with PCI to NVMe adapter.mp4

Many thanks, Daniel.

:)

 

My unusual setup fails: 2 different NVMe system drives

i found it. is it safe to change? it wont hurt the graphic card performance (or any thing else performance?)?



Sata and rst already set to ACHI.

- - - Updated - - -

okay i reconnected the m2 adapter and change this setting to 8x/8x.
They problem is still there. reset while loging to windows.

 

My unusual setup fails: 2 different NVMe system drives

this is the only free SLOT that fits.




- - - Updated - - -

Is there anyway i can export BIOS settings and uploadit here like i did with window?

- - - Updated - - -

But there is no sata port in use, so is it matter?

 

My unusual setup fails: 2 different NVMe system drives

Hey there,

i'm trying to get this special kind of system setup:
2 different NVMe system drives, that occasionally i'll take one of them out of the pc, pysycally, while at this time, the pc will boot from the other system drive.

I bought this PCI to NVMe adapter: 3 in 1 mSATA M.2 PCIE NVMe SSD to PCI E 3.0 4X SATA 3.0 Adapter Card for M2 NVMe AHCI SATA mSATA Solid State Disk Converter|Add On Cards| - AliExpress

Whenever an ssd drive is connected through the pci adapter -the operation system cannot load. most of the times it resets the pc right after windows's welcome screen.
Also, when trying to install a fresh install of windows to the ssd drive while it's connected through the pci adapter, it resets on the installion process.

I tried to install windows on the same ssd drive while the ssd connected directly to the mother board, without the pci adapter. this is the only way i can install windows.

the same ssd drive works perfectly while connected directly to the mother board.

Is it a faulty adapter? or is there some setting i can change?

videos:
Reset while loging in to windows:
Oops, something lost while log on with PCI to NVMe adapter.mp4
Reset while installing windows:
Oops, something lost while install windows with PCI to NVMe adapter.mp4

Many thanks, Daniel.