Windows 10: My Windows 10 home version 1909 detected my Rx 580 as a Rx470 and I cant launch my driver.

What I think I am encountering is a window detection error maybe?

:)

 

rx 580 overclocking

How To overclock rx 580?? Can anyone help?

 

RX 580 GPU No Signal / Not Detected in Device Manager

Msi RX 580 video card is not detected on device manager or outputting signal to the monitor.

Everything is connected properly. When connected to the GPU I don't even get the bios screen. Everytime I boot I get device not connected error, which goes away after several reboots.

I suspect that when I uninstalled Nvidia driver while amd card was installed, that this might have caused this issue. My motherboard is Gigabyte z97 gaming 7, updated to the latest bios.

 

RX 580 bad flash!

1. Windows version doesn't matter.

2. He doesn't mention installing the RX 580. I assume by "install" you mean "install the drivers for". He says he installed the drivers for the RX 570 in safe-mode. Then he booted normally into Windows and I think he used atiflash in command line mode to find the adapter #s for both cards. The RX 580 and RX 570. The RX 570(with uninstalled driver? *Confused ) was identified as AMD RADEON 10(in device manager or by atiflash? *Confused ). And presumably found the AMD RADEON 10/RX 570 listed as adapter #1. Though he says "nothing was seeing" it...so that doesn't make much sense...anyway...somehow he figured out it was adapter #1. So he force flashed the AMD RADEON 10(RX 570) using atiwinflash -f -p 1 rx570.rom . That's all the sense I can make of it. But it's a little weird the way he worded it. So I'm not 100% sure what he's trying to say.

3. He used the RX 580 as the primary source of video.

4. I think he meant to say he uninstalled the driver for the RX 570 in safe-mode. Because he then says "AMD RADEON 10 play (the rx 570 with unstalled driver)". And goes on to say that after flashing the RX 570 BIOS he rebooted and installed catalyst 17.5.2 drivers for it. Anyway driver version doesn't matter. Drivers installed or not doesn't matter for flashing a BIOS. You might have trouble installing correct drivers for a card with an incorrect BIOS though. Which is probably the point he was trying to make. Correct BIOS first, correct drivers second.