Windows 10: net3.5 fails on 20H1

Hi folks

somewhere there's a stand alone version of net3.5 -- there was a link posted in the forum but I can't find it any more -- I have a few programs that need net3.5 but it won't install on 20H1 via control panel turn windows features on / off.

Update : solved

Mount the iso of the 20H1 build on my system it's on "D".

then as administrator run the command in blue.

Microsoft Windows [Version 10.0.18898.1000]
(c) 2019 Microsoft Corporation. All rights reserved.

C:\WINDOWS\system32>DISM /Online /Enable-Feature /FeatureName:NetFx3 /All /LimitAccess /Source:d:\sources\sxsDeployment Image Servicing and Management tool
Version: 10.0.18898.1000

Image Version: 10.0.18898.1000

Enabling feature(s)
[==========================100.0%==========================]
The operation completed successfully.

Now it's working





Cheers
jimbo

:)

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

Windows 10 fails to update


When you finish testing the Avast suggestion, make sure that you restart your machine.

Then if the issue persists, please return to the trouble shooting list in post# 89

I think there are three steps that remain; the WU troubleshooter, reset WU components, and manual WU reset.