Windows 10: Netgear DG834G v 4 and Windows 10

I'm updating from Windows 7 to Windows 10 Home

I use an old Netgear DG834G v 4 router

I realise this is ancient, will it still work under Windows 10?

:)

 

Netgear DG834G as a WAP


setting the country and security level etc seems a bit flaky in this router, keeps losing settings, even after apply...sometimes the password option window doesnt appear.....I eventually got the settings to stick, logged out ( maybe this is the magic bit ) then logged in again and the settings remained....not sure what the tick box Set as WAP actually does !!

anyway, the security must be the same for WAP and router, my Virging superhubac hadSecurity Mode

[table][tr][td][/td] [td]WPA Auto[/td] [td][/td] [/tr] [tr][td][/td] [td]WPA2-PSK[AES][/td] [td][/td] [/tr] [tr][td][/td] [td]WPA-PSK[TKIP][/td] [td][/td] [/tr] [tr][td][/td] [td]WPA/WPA2 Enterprise[/td] [td][/td] [/tr] [tr][td][/td] [td]Disable[/td] [td][/td] [/tr] [/table]
whereas
the DG834G V3 has




not sure what i can chose as the same as the WPA PSK (TKIP) appears not to be selectable on the virgin hub...
any ideas please ?

 

Has anyone got a custom firmware for the Netgear dg834g v3 ?

Im looking for a custom firmware for the "Netgear dg834g v3" to increase the wireless power, has anyone got one?

Thanks in advance *Big Grin

 

Problem updating Windows Surface Pro 4 with Windows 10 feature updates

Hi,

I have manage to install image for Microsoft Surface Pro 4 by going to https://support.microsoft.com/en-us/...erecoveryimage and download a recovery image for Microsoft Surface Pro 4.

What I did to reset your Surface from a USB recovery drive was:
Step 1: Make sure your Surface is turned off and plugged in (hold down the power
button for 30 seconds).
Step 2: Insert the USB recovery drive into the USB port on your Surface.
Step 3: Press and hold the volume-down button while you press and release the
power button on your Surface.
Step 4: When the Surface logo appears, release the volume button.
Step 5: When prompted, select the language and keyboard layout you want.
Step 6: Select Troubleshoot > Reset your PC.
If prompted for a recovery key, select Skip this drive at the bottom of the
screen.
Step 7: Select the target operating system you wish to reset. This
refers to the current operating system installed on your Surface.
Step 8: Select Yes, repartition the drives, and on the next page, select Next.
Step 9: Choose Just remove my files.
Step 10: Select Reset.
Surface restarts and the Surface logo displays while the reset process continues
(this can take a while).

This always fails and I have to do the below which continues installation.
Windows 10 Installation Media:

1. Insert the Media (DVD/USB) in your PC and restart.
2. Boot from the media.
3. Select Repair Your Computer.

Select Troubleshoot.

1. Choose Command Prompt from the menu:

Type in the command:
Diskpart
Type in the command:
List disk (Note which disk is your Boot drive number mine is 0)
Type in the command:
Sel disk 0
Type in the command:
List vol (Note which volume is the EFI partition mine is 4)
Type in the command:
Sel vol 4
Type in the command:
assign letter=V:
Type in the command:
Exit
Type in the command:
V:
After you have assigned a drive letter Using Diskpart You can format the EFI partition:
Example: if you assigned a letter V to the partition the command would be:
format V: /FS:FAT32
Type in the command:
bcdboot C:\windows /s V: /f UEFI


Now I have an issue that I cannot install Feature Updates. They keep failing to install.
Any ideas how to resolve issue?