Windows 10: Newly built PC will not boot Windows USB Drive for installation

I am having a issue with the new pc I just built.Specs:CPU: AMD Ryzen 9 5900XRAM: 2 x Corsair Vengence 8GB 3200MHzMOBO: ASRock X570 TaichiGPU: Gigabyte RTX 2070 Gaming OCCPU Cooler: Corsair H150i Elite CapellexPSU: Corsair RM 750xSSD: Samsung 970 EvoHDD: 2 x Seagate Barracuda 2TBEverything but the GPU is brand new as I await to get a 30 series but aside from that. I built this computer amd everything seems to run fine it will boot into BIOS but when trying to boot into a USB to install windows it sticks at the blue windows logo no dots spinning. Here is a list of the things

:)

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

Installing Windows 7 via USB flash drive!

Its weird tho cause I have no problem with installing from disc. I did change it back to boot from HDD. I really dont want to uninstall all my components, kinds defeats the purpose of installing from usb. it would take longer to disconnect and reconnect after install then it would to just install from dvd.

Do you think its beacuse the drive was formated in ntfs, thats the only step I did different from the OP. Well that and the bootsect /nt60 command before coping files.

heres they way I went, probly have to try it fat32

launch diskpart.exe)
select disk 1 (or your USB drive number, use list disk to get it)
clean
create partition primary
select partition=1
active
format fs=ntfs
assign
exit

Now that the drive is boot aware, we have to initialize its boot sector with the Windows boot manager (BOOTMGR), using the Bootsect.exe utility located in the boot directory of the Vista installation DVD. We have to tell the utility that our target drive is NTFS formatted:

bootsect.exe /nt60 f:

 

Windows 10 USB boot

Hi there, am not a windows 10 expert. I have a pc in the bedroom on windows 10, I messed up the bootloader trying to fix the xp on that system.

System wont boot, trying to repair via win 10 usb installer.

Downloaded the media creation tool to install windows 10 installer on usb stick. Not compatible with a host of usb sticks I have. Tried the usb sticks that others use, but I think they use rufus; as the media creation tool by win 10 does not detect the usb stick.

So quick question, the win10 machine i am trying to repair the bootloader is a win7 upgraded to win10.
If i were to use the usb win10 installer to "repair installation" does the version of the iso downloaded via the media creation tool matter?

There is three options:
Windows 10
Windows 10 Home
Windows 10 N

Also is there a step by step instead of using rufus as I want to try an alternative method of creating a usb win 10 installer. Preferably with more compatibility.

System is a asus sabertooth 990 (r2?) with AMD phenom X 6.

Also is there any other software I can load onto the usb that can repair the bootloader easily?
That would be the ideal alternative. Thanks