Windows 10: No audio output device is enabled

What does 'No audio output device is enabled' mean and how can it be fixed?

:)

 

No Audio Output Device is Installed

Hi,

You will need to select Windows 8 from the drop down list while installing the driver in compatibility mode.

I would suggest you to try setting the speaker as default audio output by following the steps below and check if it helps.

1. Right click on the sound icon on the right bottom corner of the taskbar.

2. Select "playback devices".

3. If "speaker" is not set as the default device, highlight it and click "set as default".

5. Save the changes.

Let us know the result.

 

No Audio Output Device is installed error

Hi,

It seems that you've tried every solution that was provided to resolve the audio output device issue on your computer. However, we suggest that you coordinate with your device manufacturer to check in
BIOS if the audio output device is enabled. You may also ask them to fully check the hardware of your computer.

Best regards.

 

Re-enable audio device

Hi,

I would be happy to assist you.

Before we proceed with troubleshooting, I would need little information on the issue.

• Are using speakers / head phones to listen to audio?

If you have disabled the audio device, then you might not see it under the list of playback devices. I would suggest you to follow these steps to make sure you see the disabled devices:

• • 
    Open
    Control panel.
    
  • 
    Click Hardware and Sound and then Click on
    Sounds.
    
  • 
    Under Playback tab, right click on the empty area and make sure
    “Show Disabled Devices” has a check mark on it. If headphones/Speakers are disabled, it will now show up in the list.
    
  • 
    Right click on the device and
    Enable it. Click OK.
    

If the issue still persists, try enabling speakers automatically using steps below.

• 
  Go to Settings> Click on themes> Advance sound settings> right click on the speakers or the audio device youo have connected > click on
  Configure device.
  
• 
  Test the sound level you want, click Next.
  
• 
  And configure the audio devices.
  

Hope this helps you. Do reply if you need further assistance on Windows 10.

Thank you.