Windows 10: Not sure if computer is too old to install win10?

Hi people when trying to install win10 from USB it bought up these errors?
Reset PC
Error code 0x0000005D
PARAM:
0x00000000BFEBFBFF
0x 20100800
0x
0x 01

Checked NX bit is Enabled in bios, but my pc is running win7 ultimate no problems!
Pentium 4 Extreme 3.73ghz (Supports NX bit under Everest list TICKED)
3GB DDR2
GPU HD 6750

Stumped as I tried this on a G31 MOBO with the same issues, but running a P4 3.00ghz chip with 4GB DDR2

Do have other laptops with higher dual and quad but only wanted to test it to be fair?

:)

 

Not sure if this is the right place to ask

Sorry, this is a forum for mobile devices made by Microsoft. I would try to contact Ericsson, or visit a local repair shop who might be able to help you.

 

Not sure if this is the right place to ask

My Sony Ericsson won't turn on at all.

I have tried taking everything out and putting it back in again, but nothing works.

Please help.

My apologies if this is the wrong place to ask.

 

Hi, see this link How to solve Error 0x0000005D when installing Windows 8. Hope this helps in some way.

Good luck,

 

Thanks Werty enabled the NX execution bit plus my bios is so old no virtualization *Sad

 

Try to install the 32-bit version, the additional requirements are only for 64-bit windows.

 

I'll give the 32bits a go as both P4's are 64bit's and win7 ultimate runs flawlessly on both.
Never tried win8 so can't compare?
I tried DVD rom on both computers and it just won't read the disc.
The USB booter gets to the blue window screen and I can see the circular working sign, but then nothing..... stuck in a loop as the usb drive does not flash as to say its stuck and not reading.
Used Wintogo microsoft's software and then used ISO power both sucessfully stuck win10 on DVD and USB, but both computers will either get stuck into a loop or the dvd will cause a reset computer message.
I might try the laptop next but didnt want it on there.

This was the image I used! hold on this is the 32bits X86? Correct?
9860.0.141008-2044.fbl_release_cliententerprise_vol_x86fre_en-gb_5282bd33b68d4b867e5851199ac696c1e6b237f5.esd.bak

 

Where did you get that image you are using for the install ?
It looks like it might be something from a 9860 build ???
And it's named xxx.esd.bak

Here is a tutorial by Brink for a clean install:
https://www.tenforums.com/tutorials/1...n-install.html

There is a link in the tutorial for downloading the ISO used for installing.

 

It was from a guy called Murph
Yes its the latest build, but it was a ESD file so no one could corrupt/alter the files when he uploaded for torrent.
I de-crypted the files into a working image file and used the usual tools to burn the image.
I copy'ed the name from the back up esd file that the decryption uses.
The file for burning was called: JM1_CENA_X86FREV_EN-GB_DV9

 

Here is a tutorial by Kari for creating an ISO from ESD.
You might want to compare what you did to this tutorial.
ESD to ISO - Create Bootable ISO from Windows 10 ESD File

You could also try Brink's tutorial to install the original Tech Preview version.

 

Having no luck I think the bios settings is the key here, but the only issues other people have are boot security and the NX bit.
Its already is USB legacy mode it just fails once I get the blue windows screen. Even tried three different versions of win10.X86 64.
Win to go, refus, Power iso etc...
Stumpted getting desperate might try win8.1 to see if the same issues if so then it must be hardware or bios related issues I have?
*Sad*Sad*Sad

 

I installed Win10 TP 64-bit on this computer without problems:
Inspiron 530s Desktop Details | Dell
It has a P4 2.20GHz CPU and 4GB RAM.

 

I might try the VMware Player seems like a work around!
Wish I had a UEFI rather than Bios
What were the steps you took Barton?

 

Have a look at my specs probobly older than yours
Running sweet as a nut

Roy

 

Well it loaded fine on the laptop so the none virtulization on my old phonex bios just doesnt work as booting from usb on the laptop was quick!