Windows 10: November 1511 update Won't install on Windows 10 Pro 64

I having issues installing this new update released. After it reboots i get PAGE_FAULT blue screen error then goes back to prior state. I searched & tried using the media tool as this update in windows os. All went fine then same error when it rebooted. Seems this update not working. I tried it on laptop with home edition installed ok.

Seems this update a mistake & tried this several times.

:)

 

Error Upgrade Windows 10 - The installation failed in the FIRST_BOOT phase with an error during SYSPREP operation

Have you got any easily removed hardware that can be disconnected from your machine prior to the update?

Windows 10 Pro version 1511 Won't Install

Windows 10 Pro version 1511 Won't Install

See also Donatello_h replied on November 20, 2015 in this post,

Problem with Windows 10 Upgrade 1511; 10586

Problem with Windows 10 Upgrade 1511; 10586

 

Windows 10 Anneversary Update

I have a windows 10 pro(without cortana support) NOT updated to windows 10 November update. Recently I came to know that Microsoft is revealing windows 10 anniversary update. I want to know if i will be able to upgrade my laptop from the above version
to anniversary update or i should install that November update (build 1511)?... Moreover can i perform upgrades (windows 10 pro to windows 10 pro build 1511) by the windows 10 ISO files given by Microsoft?

 

You said that you get "PAGE_FAULT blue screen error" when rebooting. In that case what is this screenshot you attached to your message? Where did you get it and what does it have to do with the issue?

 

This pic from the media tool i tried to use, Make a DVD. It seems this is the next version of windows 10. It wont install I checked the update in windows 10 today & nothing there now just the windows defender updates. Microsoft took it off I had friends here locally had the same issue also. I am using version 10.0.10240 as the 1511 not available now through the update.

 

Well, you said something about some "PAGE_FAULT". The picture you posted does not say anything about any PAGE_FAULT. So, where did the PAGE_FAULT come from?

Meanwhile, the picture you posited depicts a rather widely reported "SAFE_OS BOOT" error. It typically happens when you are attempting to upgrade a drive that was prepared by drive-cloning software (like HDD-to-SSD cloning/transfer tool - Paragon Software HDD-to-SSD, for one example). I had the same error and I found no workaround for it, besides deleting all partitions from the SSD and doing a clean install.

 

Yes i couldn't take snapshot of the blue screen before. But I searched microsoft site & read to use the media creator make a .iso image but that was the error. But as i just found out that update was taken offline now

 

I have 2 w10 pro 64 installations and this update has failed multiple times and I have gone back to an earlier restore point after getting a blue screen showing WHEA UNCORRECTABLE ERROR. Anyone else having this problem?

 

I have same issue on a customer computer ,its a win7 upgraded to build 10240 awhile back ,any attempt to upgrade to latest 10586 fails with same or similar issue , I get that same blue screen with the same error ,after it get to about 28% and and say reverting back to previous os
info from error log .
------------------
2015-11-18 15:24:09, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-11-18 15:27:01, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-11-18 15:27:15, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-11-18 15:27:23, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-11-18 15:27:30, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-11-18 15:27:30, Error CDiagnosticsHelper::SetDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7]
2015-11-18 15:27:30, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session[gle=0x000000b7]
2015-11-18 15:27:52, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-11-18 15:27:54, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-11-18 15:28:04, Error CDiagnosticsHelper::SetDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7]
2015-11-18 15:28:11, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-11-18 15:28:13, Error CONX WlanOpenHandle failed with error 00000426
2015-11-18 15:28:34, Error CONX Unable to get message handle 80092009 c:\windows\system32\drivers\atihdwt6.sys
2015-11-18 15:28:36, Error CONX Failed to get inf path SYSTEM\CurrentControlSet\Control\Network\{4d36e975-e325-11ce-bfc1-08002be10318}\{58474950-424f-0058-cfe8-aba2187557f2}
2015-11-18 15:28:36, Error CONX Failed to add net component 80070002
2015-11-18 15:28:36, Error CONX Failed to open inf key SYSTEM\CurrentControlSet\Control\Network\{6bdd1fc5-810f-11d0-bec7-08002be2092f}\{8850d726-4186-4018-9d80-bdd5494cfb13}
2015-11-18 15:28:36, Error CONX Failed to add net component 80070002
2015-11-18 15:31:09, Error SP pSPRemoveUpgradeRegTree: failed to delete reg tree HKLM\SYSTEM\Setup\Upgrade[gle=0x00000005]
2015-11-18 15:31:21, Error [0x080831] MIG CSIAgent: Invalid xml format: FormatException: "id" attribute is mandatory. void __cdecl Mig::CMXEMigrationXml::LoadSupportedComponent(class UnBCL::XmlNode *,int,class Mig::CMXEMigrationXml *,class Mig::CMXEXmlComponent *)
2015-11-18 15:31:24, Error [0x080831] MIG CSIAgent: Invalid xml format: FormatException: Component with display name: Plugin/{39CC25F3-AF21-4C42-854D-0524249F02CE} already loaded __cdecl Mig::CMXEMigrationXml::CMXEMigrationXml(class Mig::CPlatform *,class UnBCL::String *,class UnBCL::XmlDocument *,class UnBCL::String *,class UnBCL::String *)
2015-11-18 15:31:33, Error CSI 00000001 (F) 80220008 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=8] #43191# from CWcmScalarInstanceCore::GetCurrentValue(options = 393216 (0x00060000), status = [6]"(null)", value = { type: 40972 (0x0000a00c), bytes ( 12 (0x0000000c) ): 65006e002d00550053000000 })
[gle=0x80004005]
2015-11-18 15:31:36, Error CSI 00000002 (F) 80220008 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=8] #122879# from CWcmScalarInstanceCore::GetCurrentValue(options = 393216 (0x00060000), status = [6]"(null)", value = { type: 40972 (0x0000a00c), bytes ( 12 (0x0000000c) ): 65006e002d00550053000000 })
[gle=0x80004005]
2015-11-18 15:31:50, Error [0x0808fe] MIG Plugin {65cbf70b-1d78-4cac-8400-9acd65ced94a}: CreateProcess(s) failed. GLE = d
2015-11-18 15:31:52, Error CSI 00000003 (F) 80220008 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=8] #213128# from CWcmScalarInstanceCore::GetCurrentValue(options = 393216 (0x00060000), status = [6]"(null)", value = { type: 40972 (0x0000a00c), bytes ( 12 (0x0000000c) ): 65006e002d00550053000000 })
[gle=0x80004005]
2015-11-18 15:33:26, Error [0x0808fe] MIG Plugin {526D451C-721A-4b97-AD34-DCE5D8CD22C5}: [shmig] Failed to get preferred homegroup with hr=0x80070490
2015-11-18 15:33:26, Error [0x0808fe] MIG Plugin {ee036dc0-f9b7-4d2d-bb94-3dd3102c5804}: BRIDGEMIG: CBrgUnattend::CollectBridgeSettings failed: 0x1, 0
2015-11-18 15:33:55, Error CSetupAutomation::Resurrect: File not found: C:\$WINDOWS.~BT\Sources\Panther\automation.dat[gle=0x00000002]
2015-11-18 15:33:55, Error SP CSetupPlatform::ResurrectAutomation: Failed to resurrect automation: 0x80070002[gle=0x00000002]

 

Microsoft should of not released it as so many having issues with it. If you check now it's off the update site so there aware now.