Windows 10: Only one ram being used after BSOD

So recently my laptop had a Blue Screen of Death, I can't remember the error code exactly but it was something about the kernel, When it rebooted I noticed my laptop was slower then usual and apparently there's only 8gb of ram. Even though I have 16gb and both the ram are in still.It's a HP OMEN Laptop 16-c0xxx

:)

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

Crossfire - 2900XT - BSOD above 5GB RAM

Many thanks for suggestions:

- memtest86+1.7.iso was used and showed all 8GB OK
- Now tried all combinations for the Crossfire internal bridges - no change to memory being reported

So, I have a Crossfire-enabled system but cannot get it to run above 5gb and when 8GB worth of RAM is inserted it BSODs.

Any further suggestions welcome...

 

To RAM or not to RAM...

Hey genesis what hardware have you bought, you might be able to save on the ram and step up the rest of the hardware a little...

Or you could go out on the town as suggested... *Big Grin