Windows 10: Pc bootloop

Hey, I've recently upgraded my pc with a new motherboard and a new cpu+cpu fanAt first it worked but then the power started cutting out seconds after logging into my computer, so i bought a new PSU since i thought a larger one will help the issuei made sure everything fits BUT a new issue arrived, i am now stuck at the AORUS motherboard loading screen, with spinning dotskeeps booting and restarting, sometimes i get the Preparing automatic repair but does not help at all.my components are:GeForce Gtx 1650 graphics card2x HyperX rgb ddr4 16gb 3200mhz ramGigabyte GA-H170M-DS3H ===> Gigabyte

:)

 

PC Bootlooping after June Security Update

Hi,

Thank you for writing to Microsoft Community Forums.

We understand the concern as you are having difficulties on the PC after installing a Windows Update.
In order to get clarity and to assist you accordingly, please reply with the answers to the questions below:

• What is the Version and Build of Windows 10 installed on the PC? (Type
  winver in Windows search/Run command)
• What is the model number of the HP PC?

• What is the KB number of the Security update installed prior to this issue?
  
• Which update are you attempting to remove?
  
• Are you able to boot the PC to the desktop?
  
• Do you have any non-Microsoft Antivirus/security program installed?
  

Meanwhile, we would suggest you to perform step 1, 2 & 3 if you are able to boot the PC to desktop and step 4 if you are unable to boot.

Step 1:
Run the Windows Updates Troubleshooter:

Select the Start button, and then select Settings>Update & Security
> Troubleshoot, and then from the list select Windows updates > Run the troubleshooter.

Step 2: Reset Windows Update Components

We would suggest you to refer the steps as mention in this article:
How do I reset Windows Update components?

Step 3: Clean boot

Try booting your PC in clean boot. Refer to the article on How to perform
a clean boot in Windows

Note: Clean Boot starts Windows with a minimal set of drivers and startup programs, so that you can determine whether a background program is interfering with your game or program. Also, you may not be able to use some
programs in clean boot.

If performing a clean boot fixes the issue then, please refer to the section
How to determine what is causing the problem after you do a clean boot
to check which program is causing the issue.

Note: Please refer the section Reset the computer to start normally after clean boot troubleshooting
to boot the computer in to normal mode after troubleshooting.

Step 4: System Restore using WinRE use bootable media

1. Use the Bootable media to boot the PC.
   

1. Boot from the media and choose “Repair your computer.”
2. Under Advanced troubleshooting, select Troubleshoot.
3. Under Advanced options screen, you will see
   System Restore.

Regards,

Aditya Roy

Microsoft Community – Moderator

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??

 

Edge Search Does Not Permit Change of Region


I got these suggestions from the Microsoft Community forum.No. 1 worked for me:

Thank you for posting the query on Microsoft Community. I am glad to assist you on this.
We have reproduce the issue here and we are able to access non-regional search for google using Microsoft Edge.
I would suggest you to try the below steps and check if it helps.
Step 1:
Clear browsing data option of Microsoft Edge and check if you face the issue. To do so perform the steps below.

1. Click on the More actions icon next to the feedback icon present on top right corner of the Project Spartan homepage.
2. Select Settings and click on Choose what to clear.
3. Check the boxes Browsing history, Cookies and saved website data and Cached data and files and click on Clear.

Step 2:
I suggest you to create a new user account and check if the issue occurs.

1. Go to Settings.
2. Choose Accounts and then select Family and other users.
3. Select add someone else on this PC.
4. Enter a user name and hit next.
5. Click on Finish.
6. Sign out from the current Account and Log into the new account.

Step 3:
It could also happen because of network issue. I suggest you to try with different network connection and check if it helps.