Windows 10: Pc boots up to BIOS After removing gpu

Two days ago i removed my gpu from my pc because it has been a little loud to the warranty distributors to check out if its normal or not, since then im not able to boot into windows, motherboard light stuck on boot, bios recognizes all my drives, ram and cpu, yet its still not booting,On another note i switched my mb cpu and ram about a week ago and i had the same problem, only that time i just enabled csm and everything went back to normal, now when i enable csm save and exit it comes back to the bios and disables it, any help on what to do? I have ensured that my cmos battery is fine since

:)

 

GPU

Hi Michael

Open Device Manager (accessible by right clicking your Start Button)

Expand the Display Adapters section

You should see your GPU listed, along with possibly an integrated graphics option

If that is no listed there:

Boot into BIOS (start your system, then on the manufacturers screen, repeatedly press the appropriate key (usually F2) to enter BIOS

Under System Information, you should find your GPU listed

If you still cannot find the GPU listing, what is the Make and exact Model No. of your PC - that will be printed on a sticker on the bottom casing . ..

 

bios

Hi all i am new in this forum, i need meanings step by step of each item listed in the bios Phoenix-Award

 

wrong bios programmed on my card what now?

are you kidding? or is this being lost in language barriers?(if so, then id suggest trying google translateon the list above, or reading it several times, im sorry that i cant help with that part) the PCIe slot is what you need, thats where you plug the GPU into. follow the step by step guide, that is your solution. VGA= Video Graphics array, or adapter in this case, AKA GPU, Aka, Video Card.

The 2nd gpu acts as a way to boot into OS since you're not able to do so with the damaged GPU. I don't know what your system specs are but if you have onboard graphics enable them in your bios and then reset your PC or do it after a reset depending on what your motherboard requires that will allow you to boot into your operating system then follow the steps after number three in the list above.( note that if you do not have built-in graphics on your CPU this is where you will use a second GPU )

i hope this helps......Best of luck, i have 35minutes to get dressed, and be on a transport to Kessel.......another day covered in Spice, *Frown (atleast im working in the Refinery *Wink )