Windows 10: pc dvd rom game

Can someone explain to me how to install the pc dvd rom game Terrifying Tales 2 onto my aspire es 15 laptop????

:)

 

CD/DVD not loading any of my pc games

Hi,  

This issue might occur due some problem with display drivers.

I suggest you to update DVD / CD drivers and check if it helps.

Please follow the steps below and check if it helps.

• Press Windows key + X and click on
  Device Manager.
• 
  Expand DVD/CD ROM.
  
• 
  Right click on the video driver and select
  Update Driver Software.
  

Please get back to us if you need any further assistance.

Thank you.

 

CD/DVD ROM not recognized

There're no lowerFilters and upperFilters keys in Regedit.

I had looked in BIOS, no such thing that relate to CD/DVD ROM. But I'll give it a second shot. Not check the Boot Options yet

 

DVD Rom is not detected under Windows 10

I know this issue is reported several times on this forum and over the internet but all those posts mark an answers which is not suitable for my case:

The issue:

DVD ROM Is visible in BIOS
In is not visible in Device Manager
It is not shown in "This Computer" listing all available drives
It is not show in Disk management
DVD is visible in Intel Rapid enterprise manger as ATAPI device

What I have tries so far:

1. Check UpperFilter, LowerFilter, UpperFilter.bak and LowerFilter.bak in the Windows Registry in the following location:
   
   HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class{4d36e965-e325-11ce-bfc1-08002be10318}
   

They are not present there so the solution that is based on deleting these values does not work in my case

1. Created HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\atapi\Controller0 key and EnumDevice1 with DWORD value = 1 and reboot. Continue with this procedure upto EnumDevice5 = 5
   
2. Checked if a DVD ROM was visible in hidden devices in Device Manager.
   It was! Then I applied the solution I found in one of the forums, which suggested to uninstall hidden devices (my DVD) then uninstall SATA AHCI standard controller and reboot.
   

I did it and then after reboot the Standard controller is back again but no more hidden DVD ROM .

1. Next suggestion I found was to modify the CSConfigFlag under HKEY_CURRENT_CONFIG\System\CurrentControlSet\Enum\SCSI registry key to value 1 and then 2, each time rebooting, but in my case I do not have such key.
   

The only HKEY_CURRENT_CONFIG\System\CurrentControlSet\Enum key that is under the ENum is PCI and no SCSI

1. I tried to use the DVD Repair Tool version 0.4.3.430 by Rizonesoft as many people reported in helped them, in my case it does nothing.
   
2. Scan whole computer with paid antivirus software - nothing found
   
3. Used sfc /scannnow - to check windows installation - no major issues were found
   
4. Run troubleshooting from control panel and went through Hardware and Devices troubleshooter.
   

My configuration is as follows:

The problem started after CPU Upgrade from Intel i7 3820.
Before DVD ROM was working, with exactly the same BIOS configuration (including RAID setting)

I can boot from the DVD, I can boot from USD and access the DVD so It seems the hardware is working OK. I think it is Windows issue.

The links pointing to the listed solutions are:

1. http://www.askvg.com/optical-drives-are-not-showing-in-my-computer/ (but actually I found it in more than 20 places)
   
2. http://www.askvg.com/optical-drives-are-not-showing-in-my-computer/ (but actually I found it in more than 20 places)
   
3. Windows 10 DVD Drive missing
   
4. 
   
5. https://rizonesoft.com/download/dvd-drive-repair/
   

Do you have any suggestions what could I try else to fix my DVD under Windows (except windows reinstall I hope)?