Windows 10: pc no hdmi signal on boot

after getting an black screen my pc is not booting my ram and c drive works 100% percent because im using an differant computer with it can some one help

:)

 

HDMI no signal only during Boot

Hey Guys,

I've just built myself a new computer, all working well, however on boot my HDMI monitor receives no signal until Windows has fully loaded. It would receive signal to see the Bios screen pop up then go blank with no signal and then about 5 seconds later will receive signal and display the desktop.

I've now added a second monitor connected via DVI, even though this is not set as my primary monitor the bios screen displays on it and I can see the entire boot process through this monitor, it will then load to desktop of which a split second later my primary HDMI monitor will then receive signal and start to display.

It's not a massive issue but it's quite annoying, any suggestions?

I'm using a GTX 970 and Windows 8.1 Pro 64-bit.

Cheers,

 

Monitor not receiving signal from pc after using hdmi passthrough

Hi,

Thank you for writing to Microsoft Community Forums.

HDMI Pass-Through does not work with all devices. Before attempting to set up an HDMI Pass-Through connection, you should make sure the source of the signal such as a Blu-ray player or Set Top Box, supports HDMI Pass-Through.

In order to get clarity on this issue and assist you with appropriate troubleshooting steps, please reply with the answers to the questions below.

1. Did you try a different HDMI cable to connect your PC to the monitor?
2. When you say "my pc will not display to my monitor", are you able to see any error message on it? For example: 'No signal'.

Meanwhile, try the below suggestions and check if this helps.

• If your monitor has an option in the Menu Button to switch the
  Input Source to HDMI Port, I would suggest you to try it.
• Try completely disconnecting your Xbox from the computer and just connect your computer to the monitor and check if you are able to see the display on the monitor.
• Make sure your display is plugged in and turned on.
• Unplug the video cable from both your display and PC, and then reconnect them firmly. After you reconnect the video cable, try moving your mouse on your display.
• Try connecting to different video outputs on your PC. Sometimes a change in driver can cause the video to be sent to a different display adapter or output.
• If you have your own display adapter installed and connected to your display,
  try connecting your display to the built-in video on the motherboard.
• Check for damaged HDMI cable, loose connections, or faulty adapters.

Hope it helps.

We're looking forward to your response.

 

no HDMI signal


I have an ASUS monitor and ASUS desktop with a graphics card not on board graphics. I have an HDMI cable from the monitor to the video card. Today for the first time while on the internet my screen froze and then went blue saying no HDMI signal. I tried everything but still no signal. I then tried my VGA cable and all was working. I then tried my HDMI cable again and it worked until this afternoon when I was watching a video on the internet and the screen froze and said no HDMI signal. also when this happened I could hear my fan running loudly. Any suggestions on what the problem could be?