Windows 10: Pc not booting

So, today i unplugged my gpu to check if theres enough space on my motherboard to install a wifi card. After that i plugged it all nack in properly but when i tried to power it on the famous blue screen of death appeared and it said: KERNEL_MODE_HEAP_CORRUPTION and restarted, after that my pc wanted to fix itself but the screen froze and i had to turn it off by using the power button on the case itself wich is never good, now everytime i start it it just goes to the bluescreen again. I tried everything so what should i do? I really dont want to loose my pc or spend 80 euros on a maybe useless repair. My Specifications: AMD Ryzen 3 3200G 4x 4 GHz

AMD Radeon Vega 8 Grafik

16gB DDR4 PC-3000

240GB SSD

Windows 10 Pro And a 1tb hdd

submitted by /u/EinfachVeo
[link] [comments]

:)

 

Boot Process

Hi,

Please suggest me a link that can explain the boot process step by step of ...

• Windows 7,
• Windows 8.1,
• Windows 10,
• Windows Server 2008 R2 and
• Windows Server 2012 R2

With Regards

InTech

 

PC wont boot up (No POST, No Video)

I recently installed a new Asus M5A99X Evo r2.0. The motherboard green LED lights up and the case and cpu fans spin. But there is no video when its hooked up to my monitor.

Steps that i have tried:
"No POST", "system won't boot", and "no video output" troubleshooting checklist

Made sure all connections are properly connected.

Flashing the CMOS

Tested the PSU

Followed all steps in the user manual

If there are any links that you guys can point me to or suggestions that could help it would be highly appreciated. Thank you

 

laptop doesnt boot automatically

This is what happened.

1. Did a repair install and later disabled hibertnate in CMD.
2. Enabled legacy option ROM in BIOS.
3. After a few times startup ( i used the system in such mode for 5 days), changed boot option back to default.
4. Vola!! It boots automatically to win10 without any keypress. Tested it with many starts to confirm the same.
5. Re-enabled hibernate option using CMD and later selected Fast Startup.
6. System booted normally, without the need for any keypress.

I do not know exactly whether such steps resolved the problem or what else happened, hence cannot suggest above steps.

Many thanks to all members who helped to troubleshoot problems.