Windows 10: Pc on but no signal to monitor.

I got a 2nd hand pc just recently and I decided to play on it for a bit. It was working fine for a few hours but then it suddenly crashed and had to restart. I restarted it but then it got stuck on the boot screen so I force restarted. Now the pc is onLights,fans etc. On but the monitor and keyboard are not getting a signal.

:)

 

Monitor not receiving signal from pc after using hdmi passthrough

Hi,

Thank you for writing to Microsoft Community Forums.

HDMI Pass-Through does not work with all devices. Before attempting to set up an HDMI Pass-Through connection, you should make sure the source of the signal such as a Blu-ray player or Set Top Box, supports HDMI Pass-Through.

In order to get clarity on this issue and assist you with appropriate troubleshooting steps, please reply with the answers to the questions below.

1. Did you try a different HDMI cable to connect your PC to the monitor?
2. When you say "my pc will not display to my monitor", are you able to see any error message on it? For example: 'No signal'.

Meanwhile, try the below suggestions and check if this helps.

• If your monitor has an option in the Menu Button to switch the
  Input Source to HDMI Port, I would suggest you to try it.
• Try completely disconnecting your Xbox from the computer and just connect your computer to the monitor and check if you are able to see the display on the monitor.
• Make sure your display is plugged in and turned on.
• Unplug the video cable from both your display and PC, and then reconnect them firmly. After you reconnect the video cable, try moving your mouse on your display.
• Try connecting to different video outputs on your PC. Sometimes a change in driver can cause the video to be sent to a different display adapter or output.
• If you have your own display adapter installed and connected to your display,
  try connecting your display to the built-in video on the motherboard.
• Check for damaged HDMI cable, loose connections, or faulty adapters.

Hope it helps.

We're looking forward to your response.

 

Windows 10 Update Installed & Now No Signal to Monitor

Hi,

For us to isolate your concern with your monitor's signal, we would like to know the following:

• When you say "signal", are you referring to the Internet?
• Are you getting any error messages? If yes, what is the exact error message?
• To make sure that we have not missed on anything, what troubleshooting steps have you done so far?

We look forward to your response.

 

PC boots up but monitor shows 'no signal' and keyboard not working.

Thanks for your answer, however i have checked all cables and connections and these are fine (work with other pc). Re step 2 - i cannot boot to safe mode as there is no monitor signal so i cannot see anything except a black screen.

how can i boot my PC to safe mode if i cannot see anything?

I can't change the signal resolution either as no monitor!!