Windows 10: Pc ports not working

So I just finished building a pc. Now whenever I turn it on the case fans, all the lighting, and gpu fans come to life. But when I turn on the monitor it says no signal. And also none of the usb ports are working. Any tips?I have tried different usb and hdmi ports and none of them work.

:)

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??

 

USB Ports not working

Hi Marvin,

We appreciate your interest in Windows 10.

As you are facing issues with accessing the USB ports on your device, do not worry we will help you with this issue.

Do let us know the make and model of the device?

This issue might have occurred due to corrupted drivers on your device. Try the below troubleshooting steps and check if it helps.

Step 1: I suggest you to check if there are any drivers with exclamatory mark in Device Manager.

• Press Windows + X keys from the keyboard, click on
  Device Manager.
• Check for the drivers with exclamatory mark in yellow triangle.
• If so, right click on the driver, click on Properties
  and check the device status.
• Also, try to update the drivers by click on Update driver software
  under Drivers tab in Properties window.

Step 2: I suggest you to run Hardware and Devices troubleshooter.

Hardware and Devices troubleshooter
checks for common problems and makes sure that any new device or hardware connected to your PC is installed correctly.

• Press Windows key from the keyboard, type
  Troubleshooting and select it.
• Click on view all option on the upper left corner of
  Troubleshooting window.
• Select the Hardware and Device
  options from the list.
• Click Next to run the
  Hardware and Device Troubleshooter.

Hope it helps. Reply to the post with an updated status of accessing the USB ports for further assistance.

Thank you.

 

USB 2 port not working in Windows 10 on Samsung Notebook

Hi Tomale,

Thank you for posting in Microsoft Community.

Since all the USB ports are working and the problem is with the USB 3.0 port in the right side of the laptop, then this issue is with that particular port.

You can contact the manufacture of the laptop to get it done.

As a workaround, I suggest you to Run Hardware troubleshooter and check if it helps.

Follow these steps to run hardware troubleshooter.

• Type troubleshooting
  in search box.
• Select view all on the top left pane.
• Click on Hardware and Devices Troubleshooter and follow the prompts to
  run the troubleshooter.

Thanks.