Windows 10: PC stuck on boot loop after installing Intel RST

I installed Intel RTS on my desktop, without knowing if it would work. My problem started here. After completing the installation on my C drive nvme SSD the program said that it is going to reboot the PC into safe mode to complete the installation. My PC turned off and it started boot looping. Now I don't see anything on my monitor and the PC constantly turns on and off every 3 seconds, the only way I can interrupt the loop is by pressing the power button for 5 seconds. Can someone help me fixing this problem? Is there a way I can revert everything to factory settings? Plus, I can't boot into the BIOS, and the PC is 1 month old.


Thank you very much for your help.

Alex

:)

 

Intel RST service is not running

Hi,

Thank you for writing to Microsoft Community Forums.

The Intel RST service is for the Intel Rapid Storage Driver. The Intel Rapid Storage Driver provides speed for data transfer and improves the performance for SATA drives or PCIe drives.

• What is the make and model of the computer and motherboard?
  

You can follow the methods mentioned below and check if that helps:

Method 1: Changing the startup type for Service

You can try changing the startup type for the Intel RST service and check if that makes a difference. Please refer the steps mentioned below:

1. Press and hold Windows key + R, to open
   Run dialog box.
   
2. Type serivces.msc and click on
   OK.
   
3. Now, scroll down, look for Intel RST service, right click on it and click on
   Properties.
   
4. Now, under startup type select Automatic from the drop down menu.
   
5. Click on Apply and OK.
   

Method 2: Updating the drivers manually

You can try downloading the latest version of Intel Rapid Storage Driver from the

Intel Website and check if that helps. However, I would suggest checking with the motherboard manufacturer website as well.

If you are using RAID configuration, I suggest you to post your query in

TechNet forums, where we have support professionals who are well equipped with the knowledge on RAID configuration.

Nikhar Khare

Microsoft Community - Moderator

 

How to use Intel Rapid Storage Tech software with Kyhi boot rescue

When using the Kyhi boot if the Intel RST acceleration can be disabled the 750 GB drive in RAID 0 can then be moved to any computer and the files read.

Intel was contacted regarding the Intel RST and they indicated that the Intel RST is a HP driver.
HP was contacted regarding the failure to install the driver(s) and they indicated that they troubleshoot hardware and not software.

When using Kyhi boot rescue does the classification as to whether it is software or a driver impact the ability to install?

Are there any other steps to get the software or drive installed when using Kyhi boot rescue?

There was an error log for the Intel RST.
Amazingly there was no troubleshooting support of the log available at Intel or HP.



SIW2 the steps that were listed in the post #6 I was not able to interpret.
Please use alternative words and steps so that they can be followed by a beginner.

 

intel rst driver

i dont have win 10 installed so cannot try... does intel rst works? i have found that it is much faster then MS default drivers with 97 boards with win 8.1. Not so much in benchmarks, but in practice win 8.1 boots much faster with iastora.sys then benchmarks
difference suggests.