Windows 10: PC stuck While Factory Resetting

My Windows 10 Laptop has been stuck in a State Of the Asus Logo start up and then restarting.

This happened when I Followed One Of your tips when my Percentage was stuck at 89 for 10 minutes straight.

It was the hold down power button method.

How do I fix this?

:)

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

Stuck during factory reset.


So the Factory reset has been stuck at 2% for the last 8 hours.

 

Windows 10 computer Factory reset stuck at 64%

Hello,

I have this exact issue at the moment. The factory reset is stuck at 64% and no, the answer given wasn't very helpful AT ALL. The screen is still stuck at 64%, what's the next step i should take? Should i manually force the PC to shut down and start it back
up? Urgent, thanks.