Windows 10: PC turns on but no display or power to usb

Tried reseating gpu, cpu and ram multiple times. Tried to clear cmos to no availJust bought new cpu, ram and motherboard. Q-led says its either boot or dram thats the problem. I am so frustrated hope someone can help

:)

 

Display does not turn off when pc is idle

Just did all the suggestions. Did not work. Display does not turn off.

This issue was from the beginning when I downloaded Win 10. I had Win 8.1 and the display always turned off as I set it.

My pc is HP Pavilion Touchsmart 23 all-in-one. According to "checking for updated drivers on display and monitors", I always get the response that the drivers currently installed are the correct ones.

 

Power setting turns display off as set but then it turns right back on  

Verna,

But you did not look at that tutorial's list of related tutorials for all the other
Add or Remove ... from Power Options - TenForumsTutorials
ones. That's what I suggested. The link to that particular tutorial was just a way in to the set of them.



And you'll find even more of the set by searching the list of tutorials.


Denis

 

USB settings in Power Plan Options on Windows 10 is missing, how to restore it?

As per the below suggested steps I am trying to disable the USB in USB selective suspend setting in my Dell laptop with Windows 10 Home. however, I do not find the USB Settings at all in two modes Balanced mode or Dell (Active) mode under change advanced
power settings. How to restore it?

USB Selective Suspend Settings, follow the steps below:

1. Press Windows + X.
2. Choose Power Options.
3. Select Choose when to turn off the display.
4. Open Change advanced power settings.
5. Expand USB settings and USB selective suspend setting.
6. Select Enabled (default) or Disabled.
7. Click Apply, then OK.