Windows 10: PC unable to start

Hello,


Yesterday my pc suddenly show black screen while working and unable to restart after that. when it try to restart it show a message "The current input timing is not supported by the monitor display. please change your input timing to 1920x1080, 60hz or any other monitor listed timing as per the monitor specifications."

now my PC can not to be start or hard reset so i am unable to change the display settings.


Is there any hardware issues.

please help me out.


PC config.

Intel I7 4790, Asus z97k, 8GB DDR3 RAM, AMD Radeon R7 360 2GD5

Monitor: Dell


thanks.

:)

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??

 

Sometimes unable to log in

Hi,



To troubleshoot you concern, we recommend you to start your computer in safe mode, then perform clean boot after. Refer to the links below for steps:

• Start your PC in safe mode in Windows 10
• How to perform a clean boot in Windows

After performing a clean boot, follow the steps under the section How to reset the computer to start normally after a clean boot troubleshooting.

If the suggestions above will not work, you can follow the troubleshooting steps found on this

link.



Regarding your pin concern, we suggest you to refer to Jessen P's
suggestions on April 25, 2015 found on this
link.

Update us on the result.



Thank you.

 

Unable to personalize tiles in Start menu Windows 10

Hi Slobodan,

Please answer these questions to assist you better.

• Which is the build installed in your computer?
• Have you installed all pending Windows updates?
• Are you facing this issue in Microsoft Account or Local Account?

I suggest you to install all pending Windows updates and check if that helps.
Updates are additions to software that can help prevent or fix problems, improve how your computer works, or enhance your computing experience.

I would suggest you to check and install any latest Windows Updates available.

1.
Go to Start and then
Settings.

2.
Click on Update and Recovery.

3.
Check for updates under
Windows Updates.

4.
Restart the system and check if the issue is resolved.

Refer the steps to know the latest build in your computer.

• Click on Start button and select Settings.
• Click on System and select About.

You may also refer the link suggested by Ramesh Srinivasan on February 20, 2016
and follow the steps suggested.

Lost "Pin to Start Screen" and other options, can't drag icon to Start

Do let us know if you are still unable to personalize start menu. We will be more than happy to assist you.

Thank you.