Windows 10: PC will not boot.

Presses power on button, windows loading screen loads forever (tested this and did not start for over an hour)

When I force shutdown and boot untill I see 'preparing automatic repair', it will load for a few seconds and then will show a black screen with a curser.

The other day following the black screen I decided to press the restart button on my pc, and windows loaded pretty quickly. I can't replicate this.

Also. New motherbored - GA-X79-UD5 New Cpu - i7-3820 New ram - Ripjawsz 4gb x4 sticks. New Gpu - gtx 650 ti I have the same PSU and HDD

Please help.

submitted by /u/zacharycampion
[link] [comments]

:)

 

Boot Process

Hi,

Please suggest me a link that can explain the boot process step by step of ...

• Windows 7,
• Windows 8.1,
• Windows 10,
• Windows Server 2008 R2 and
• Windows Server 2012 R2

With Regards

InTech

 

PC wont boot up (No POST, No Video)

I recently installed a new Asus M5A99X Evo r2.0. The motherboard green LED lights up and the case and cpu fans spin. But there is no video when its hooked up to my monitor.

Steps that i have tried:
"No POST", "system won't boot", and "no video output" troubleshooting checklist

Made sure all connections are properly connected.

Flashing the CMOS

Tested the PSU

Followed all steps in the user manual

If there are any links that you guys can point me to or suggestions that could help it would be highly appreciated. Thank you

 

laptop doesnt boot automatically

This is what happened.

1. Did a repair install and later disabled hibertnate in CMD.
2. Enabled legacy option ROM in BIOS.
3. After a few times startup ( i used the system in such mode for 5 days), changed boot option back to default.
4. Vola!! It boots automatically to win10 without any keypress. Tested it with many starts to confirm the same.
5. Re-enabled hibernate option using CMD and later selected Fast Startup.
6. System booted normally, without the need for any keypress.

I do not know exactly whether such steps resolved the problem or what else happened, hence cannot suggest above steps.

Many thanks to all members who helped to troubleshoot problems.