Windows 10: PC won’t boot into windows

Hello, hopefully someone can help me. My PC fails to boot into Windows. Upon starting it immediately goes to a recovery screen with Error Code: 0xc0000001 and says you’ll have to use recovery tools.

I can try to start again and it comes back to this same screen or I can press F8 for startup settings. If I do this and try to Enable Safe Mode the PC restarts and immediately goes to the same recovery screen.

I created USB media and tried booting from that but this is not giving me any recovery/repair options, it only wants to go through the new installation process.

Any suggestions?

:)

 

Skype won´t wok in 17063


Skype Won´t work... games won´t work...

Making backup and re-format...

Maybe I Install a Windows 7 again, At least, all of my games run smoothly ...Sadness!!

*Banghead

 

My pc won´t boot Windows 10 from USB/DVD

So I wanted to change from my Windows 10 x32 bits to 64x. I downloaded the Mediacreationtool and used it in both a USB and a DVD. Tried used the usb, the disk and both at the same time but they won´t boot.

I have a P7H55-M motherboard, the BIOS is updated and configured to boot first DVD, second usb and third SATA.

So if someone could help me it´d be great.

 

Sabertooth 990fx won't boot to windows logo, it shuts down

to boot and enter bios and load windows, any todays PSU (with the correct plugs) will work, AFAIK

to enter BIOS only low wattage is used.
Then, during boot, the HDD and a bit later the videocard card start to demand juice, then the other devices and periphericals... so the total demand during boot up is incrementing step by step, that's why a failure halfway could indicate a PSU problem....