Windows 10: Persistent BSOD Errors

I have had a recurring problem with a variety of BSOD errors going back about 18 months. They seem to come and go in frequency, sometimes being weeks apart and sometimes back to back, 3 or 4 in a day. This is on a personal desktop machine, so I've just put up with it. Every few months I get fed up enough to dig into it, but nothing I've tried seems to make any difference . . . no better and no worse. For a while I thought NordVPN was the culprit, since almost every time I tried to connect to a server I got a crash. However I've uninstalled NordVPN completely at this point, and the BSOD co

:)

 

BSOD - Registry Error

Your BSOD code is 0X000000051

Here's the Google search I did for it: https://www.google.com/search?q=0x0...j5.399j0j7&sourceid=chrome&es_sm=122&ie=UTF-8

There is a hotfix available that might help, https://support.microsoft.com/en-us/kb/810558

This thread makes a few good suggestions too: http://www.sevenforums.com/bsod-hel...dows-7-pro-sp1-registry-error-0x00000051.html

+1 to listing your full system specs, OS version, etc. I did only look at your BSOD log file.

Run a Diskchk /R (I know you already ran one, so you can skip this)

Run SFC /SCANNOW

Report back.

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

Persistent BSOD ntoskrnl.exe

Ok understood CW. Could it be possible that even though the memory used is in the QVL list for the motherboard that it would still cause BSODs? I don't really feel like futzing with Memtest so would next steps be updating to latest BIOS, installing all RAM and then retesting?