Windows 10: power state failure when turn the computer on.

I have Driver power state failure when I turned on my computer after a long shut down. This has not happened when my computer wake up from sleep. This only happened when I turned of the computer off for more than 6 hours and turn it back on. Could you please help?

:)

 

driver power state failure help!

Hi,

It is possible that the error Driver Power State Failure you received is can be caused by
the driver itself or power settings.
To address your issue, we suggest that you follow the steps shared by S M Mahmudul Hasan
on this thread on how to troubleshoot Driver Power State
Failure.

Keep us posted if you need additional help.

 

Driver power State Failure

HP Pavilion 23

Power Driver State Failure

It takes 10 minutes for my computer to turn on and anytime I restart computer its very annoying and time consuming

blue screen with sad face showing Power Driver State Failure

Why!!! Please Help

Never had this problem with my 8.1 Touch Screen HP Pavilion 23 Only after I downloaded Microsoft Windows 10

Please Someone Help Me

 

Power driver state failure

Hello, thanks to contact the Microsoft Community. My name is Israel Torres, I am an Independent Advisor.

Driver Power State Failure errors are usually caused by a computer or device driver going into sleep mode while you’re still using the device. Windows would send a wake signal to the device once it is needed and if the device doesn’t respond in time or at all,
Windows flags a Driver Power State Failure error. The error can be caused either by the driver itself or power settings.

Fix Windows 10 Driver Power State Failure error

Two popular causes of this error were graphics drivers and Wi-Fi card drivers. It makes sense to update both while you’re here.

1. Navigate to Control Panel, Hardware and Sound and Device Manager.

2. Select your Network adapter and/or Display adapter.

3. Right click, select ‘Update Driver Software and Search automatically…’.

4. Reboot your computer and retest.

If a new driver doesn’t work, turn off power saving.

1. Navigate to Control Panel, Hardware and Sound and Power Options.

2. Select ‘Change power settings’ next to the active power plan.

3. Select ‘Change advanced power settings’ text link.

4. Select ‘Change settings that are currently unavailable’.

5. Find Graphics Settings or PCI Express and Link State Power Management and set to Maximum performance, depending on what computer you have.

6. Find Wireless Adapter Settings and set to Maximum performance.

7. Reboot your computer and retest.

If this troubleshooting doesn't work, please follow the steps in the next link:

https://windowsreport.com/driver-power-state-fa...

____________________________________________________________

Note: This is a non-Microsoft website. The page appears to be providing accurate, safe information. Watch out for ads on the site that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised
on the site before you decide to download and install it.