Windows 10: powercfg /batteryreport doesn't report in detail

Discus and support powercfg /batteryreport doesn't report in detail in Windows 10 BSOD Crashes and Debugging to solve the problem; I usually check my battery health using powershell and this time i check it, usage history, battery capacity history and life estimation are blank. I... Discussion in 'Windows 10 BSOD Crashes and Debugging' started by NicolasHry, Dec 18, 2020.

  1. powercfg /batteryreport doesn't report in detail


    I usually check my battery health using powershell and this time i check it, usage history, battery capacity history and life estimation are blank. I don't know why but i think it's because i installed something like batterylimiter/throttlestop? Or perhaps because i reset my pc to clean it?

    Note: Battery condition is new

    other detail is listed though except those 3 since i reset the pc


    TIA

    powercfg /batteryreport doesn't report in detail [​IMG]

    :)
     
    NicolasHry, Dec 18, 2020
    #1

  2. Cannot run powercfg /batteryreport. Error 0x408

    Hi,

    Windows 10 x64 1903

    I cannot run powercfg /batteryreport from an elevated command prompt. The error:

    "C:\WINDOWS\system32>powercfg /batteryreport

    Unable to perform operation. An unexpected error (0x408) has occurred: (null)"

    Diagnostic Policy Service is running.

    Power service is running.

    Ran:

    "DISM /Online /Cleanup-Image /CheckHealth

    DISM /Online /Cleanup-Image /ScanHealth

    DISM /Online /Cleanup-Image /RestoreHealth"

    To no avail.

    Ran:

    "sfc /scannow"

    To no avail.

    Tried running "powercfg /batteryreport" command from another admin profile, to no avail.

    "Powercfg /?" returns the list of commands. Some commands produce the same error, others do not.
     
    Frustrated Noob, Dec 18, 2020
    #2
  3. BetoLP Win User
    Windows doesn`t start. Authomatic repair doesn`t work.

    Thanks again!!

    I`m sorry I had not noticed that the text on the picture was in spanish. It says that windows has replaced some damaged clusters in "name" file and "directory". Then, at the end "an unspecified error occurred (75736e6a726e6c2e 4f6)".

    I`ll do it and I`ll be updating this thread when I have the report.

    - - - Updated - - -

    I ran SeaTools. These are the results:

    powercfg /batteryreport doesn't report in detail [​IMG]


    Does it mean my HDD is useless?
     
    BetoLP, Dec 18, 2020
    #3
  4. powercfg /batteryreport doesn't report in detail

    Error 0x422 on running powercfg /batteryreport from Administrator Command Prompt


    powercfg /batteryreport doesn't report in detail ee00e146-330d-4846-83d3-191f844a89d0.png


    I run on Windows 10 Home Single Language.

    The command worked twice previously, but mysteriously stopped functioning later on, giving this error.

    I've also tried powercfg /batteryreport /output C:\some\path\here.

    I've checked this thread, and have not received a plausible answer.
     
    ShivamMukherjee, Dec 18, 2020
    #4
Thema:

powercfg /batteryreport doesn't report in detail

Loading...
  1. powercfg /batteryreport doesn't report in detail - Similar Threads - powercfg batteryreport doesn't

  2. powercfg //batteryreport

    in Windows 10 Drivers and Hardware
    powercfg //batteryreport: i cant check my batery health on both windows powershell and command prompt both using admin when i type powercfg /battery report it says you do not have the permissions to perform this action .what can i do...
  3. powercfg /battery report shows "No Batteries are currently installed"

    in Windows 10 Drivers and Hardware
    powercfg /battery report shows "No Batteries are currently installed": Hi all Acer Aspire 5755G Win 10 version 20H2 10.0.19042.685 My laptop has lost both it's battery icon and it's low battery warnings but the charger is seemingly still charging the battery properly to full capacity, when the charge light changes colour. Running "powercfg...
  4. Powercfg /requestsoverride doesn't work

    in Windows 10 Performance & Maintenance
    Powercfg /requestsoverride doesn't work: I added a problematic device with the powercfg /requestsoverride driver devicename system command. And I can see it listed when typing just powercfg /requestsoverride. However, when I type powercfg /requests, it's still there and it's preventing the PC from going to sleep...
  5. powercfg /batteryreport "file already exists"

    in Windows 10 Ask Insider
    powercfg /batteryreport "file already exists": Currently trying to run a battery report on my HP laptop but I'm repeatedly getting the error message in both Command Prompt and PowerShell: Unable to perform operation. An unexpected error (0xb7) has occurred: Cannot create a file when that file already exists. This...
  6. Use powercfg /batteryreport to see battery capacity to show 116% in laptop

    in Windows 10 Network and Sharing
    Use powercfg /batteryreport to see battery capacity to show 116% in laptop: Dear Sir, Could you know why battery capacity to show 116% over 100%? Thank you. CHEMISTRYLION DESIGN CAPACITY51,050 mWh FULL CHARGE CAPACITY44,740 mWh Recent usage Power states over the last 3 days 2020-08-1313:33:33ActiveAC33 %17,110 mWh 13:40:36Suspended42 %21,360 mWh...
  7. Windows 10 Powercfg Report---How to correct problems reported

    in Windows 10 BSOD Crashes and Debugging
    Windows 10 Powercfg Report---How to correct problems reported: I have ran a powercfg report the provided the below information. What error is most important to fix? How do you fix them? Are there any errors that don't have fixes? Analysis Results Errors USB Suspend:USB Device not Entering Selective Suspend This device did not enter the...
  8. Cannot run powercfg /batteryreport. Error 0x408

    in Windows 10 BSOD Crashes and Debugging
    Cannot run powercfg /batteryreport. Error 0x408: Hi, Windows 10 x64 1903 I cannot run powercfg /batteryreport from an elevated command prompt. The error: "C:\WINDOWS\system32>powercfg /batteryreport Unable to perform operation. An unexpected error 0x408 has occurred: null" Diagnostic Policy Service is running. Power...
  9. POWERCFG /ENERGY doesn't work anymore

    in Windows 10 BSOD Crashes and Debugging
    POWERCFG /ENERGY doesn't work anymore: On one of my computers POWERCFG /ENERGY doesn't function (anymore). It returns immediately and doesn't create the expected output file. I have created a PowerShell test script that helps reproducing the issue. Here's the script: #requires -RunAsAdministrator...
  10. powercfg problem

    in Windows 10 Support
    powercfg problem: I have a powershell script that calls powercfg -lastwake. Every now and then it will not return any data. The code below Checks the return value $wake for null. If null it calls powercfg again. The other day I checked the system and the $try was at 2448. I did a ctrl-c which...