Windows 10: Problem - Samsung Xpress M2675F problem with I/O error scanner WIN 10 PRO

I receiving this error very long time the below error message while trying to use my Samsung scanner model Xpress M2675F. "I/O error while communicating with the device. Please wait and try scanning again. If it does not help, please turn the device off, then switch it on and wait while it warms up." or "Error during scan. Please restart the program and/or switch the device off, then switch it on and wait while it warms up." I use Windows 10 ProVersion- 21H1OS build - 19043.1165Last drivers from HP from 19.08.2021. same problem, how to fix this.

:)

 

Win 7 Pro to Win 10 Upgrade Graphics Problem


I have an HP Desktop with genuine Win 7 Pro. An online check of the Win 10 upgradability of the computer comes up with a failure of the onboard graphics drivers (ATI Radeon Xpress 1150). The graphics do NOT have updated drivers available. This was the only problem listed.

To alleviate the problem, I installed a new Gigabyte GeForce GT 710 Video Card in a PCIe X 16 slot, and installed the drivers. The new video card works great. I ran a test of the computer's performance, and all came back good with Win Aero at 5.3 (range 1.0 to 7.9) and Graphics Performance at 6.7.

All looked good. I then ran another Win 10 upgrade test, and the report came back again with problems with the ATI Radeon Xpress 1150 drivers, though I am NO LONGER using the onboard graphics.

I am assuming I have to somehow disable the onboard graphics, or remove the drivers, or adjust the registry. I further assume that in order to install Windows 10, I have to pass that test. Any thoughts or ideas would be greatly appreciated. I can elaborate at your request.

 

Samsung M2070 not scanning after update to Windows 10 pro 2004: "I/O error while communicating with the device"

Printing is working. Scanning does not.

Easy Printer Manager shows error "I/O error while communicating with the device".

Windows 10 pro 2004.

All drivers installed from https://support.hp.com/us-en/driver...0-laser-multifunction-printer-series/16450377

 

Microtek scanner on Win 10 Pro

Hi Jean,

To get better clarity on the issue, kindly answer the questions below:

• Is the scanner detected under Devices?
• Were you able to see the scanner on the Device Manager?
• Have you installed the latest driver for the scanner?

We suggest you to run the troubleshooter for hardware and devices. To do this, follow the steps:

• On the Start menu, type Troubleshooting and hit enter.
• Choose Hardware and Sound.
• Select Hardware and Devices and run the troubleshooter.

If issue persists, we suggest you contact the manufacturer to get better assistance.

Do let us know if you need further assistance.