Windows 10: Problem with formatting HDD

Hello, I have a problem with formatting HDD.

I have 2 disks: SSD (C: with Windows) and HDD. I wanted to back up and format files from HDD. I did the slow format with the default settings of NTFS etc., but finally the message "Windows could not finish formatting" popped up. When trying to open the disk: "D: \ is not available.The request failed because of a critical hardware error. "
I noticed that the file system has changed to RAW, but I don't know how to change to NTFS.
I can't format it second time, errors pop up.

I would be very grateful for help.

:)

 

How To Format A Write Protected Flash Memory ?

¿You already tried this one?...

Run CMD


1. diskpart
2. list disk

Then in the 3º step, put the correct number of disk in the list for the usb flash (if it's listed in disk 3, then you'll have to write select disk 3).

2. select disk #
3. clean
4. create partition primary
5. select partition 1
6. active
7. format fs=fat32
8. assign
9. exit

with that commands you will format the flash drive in fat32, if you have a large drive you can select also "format fs=ntfs" in step 7.

good luck!

 

External HDD needs format

Hi there @menu

from Windows command mode

1) Diskpart
2) list Disk
3) select disk <disk4> I think it would be in your case
4) clean
5) convert gpt (optional step but I prefer gpt HDD's these days even just for data disks)
6) create partition primary
7) format fs=ntfs quick
8) assign
9) exit

now you should have HDD ready for use and assigned a disk letter.

you don't need to create an efi partition for this disk either.

Cheers
jimbo

 

unlock hdd

Hi Johan,

It is possible that your
HDD was unreadable
causing the error message to appear. We recommend that you perform these troubleshooting steps and check if there are any changes:

• 
  Shutdown
  your
  PC.
  
• 
  Unhooked
  the
  HDD
  and
  turn on
  your
  PC.
  
• 
  Reconnect
  your
  HDD
  and
  restart
  your
  PC.
  

If the issue persists, we suggest that you contact your
laptop/computer's manufacturer
for further assistance.

Update us on how it goes.

Regards.