Windows 10: public ip

if someone know our public ip addres so what info he can get. and can he hack us or controll our pc through are public ip address ? please tell me what info does public ip can give and does someone can hack or remotly controll my devices* Moved from Mobile Devices

:)

 

Asus RT-AC88U problem with public ip starting with 10.xxx.xxx.xxx

10.x subnets are quite common. Everyone seems to think that 10.x or 172.x subnets or anything other than 192.168.x.x. = public IP when there's actually 3 private IP ranges in use on IPv4 protocol.

Most enterprises actually use the 10.x.x.x

I use all 3 for each VLAN to make it easy to tell which VLAN a device is on.

• 10.0.0.0/8 IP addresses: 10.0.0.0 -- 10.255.255.255.
• 172.16.0.0/12 IP addresses: 172.16.0.0 -- 172.31.255.255.
• 192.168.0.0/16 IP addresses: 192.168.0.0 – 192.168.255.255.

 

Private Network seen as Public and Unidentified and IP corrupt with blank Default Gateway

My Function Discovery Resource Publication is Stopped, and I cannot Start it. (Error 0x80070005: Access is denied.)

 

Private Network seen as Public and Unidentified and IP corrupt with blank Default Gateway

Hi Matthew,

Thank you for responding.

Step 1: I would like to inform that if you run the command and receive an error referring to NetSetupDeleteObject, run the netcfg –d command until it’s successful.

[*]
After running this command, you might need to reinstall and set up other networking software you might be using, such as VPN client software or virtual switches from Hyper‑V (if you're using that or other network virtualization software).

[*]
Step 2: Also, I suggest you to check the following services are enabled.

• Press Windows Key + R on the keyboard and type
  services.msc, Services window gets opened.
• Check if these services are enabled:
  
  - TCP/IP NetBIOS Helper service
  
  - Wireless lan
  
  - DHCP
  
  - DNS Client
  
  - Function Discovery Resource Publication
  
  - SSDP Discovery - UPnP Device Host
• To start the service and set it to automatic, follow these steps:

• Right-click each of the services listed above and click on Properties.
• Click the General tab, and then, next to Startup type,
  select Automatic.
• Click Apply, and then click Start.

Restart the computer and check if the issue persists.

Hope it helps. Get back to us for further assistance on this issue.