Windows 10: Question regarding WMIC

I'm looking to upgrade my laptop RAM ASUS X441BA, so I want to check my capacity first.I typed in on cmd:wmic memphysical get MaxCapacity, MemoryDevices I got the outputMaxCapacity MemoryDevices 4194304 2What does this mean?Do I have 4194304 kilobytes 4.1GB to fit in within 2 slots, or Do I have 4.1GB per slot? I have two conflicting informations about this.

:)

 

WMIC is not working in my system, for the every query it is showing Error with eventid: 5858 and ResultCode = 0x8007007E.

Hi ravikarthik,

Since you are asking an advanced question regarding WMIC, I suggest that you post this on ourTechNet
Forums. The members there include IT professionals that can provide a more advanced recommendation on the next step to resolve your issue.

Regards.

 

SSD Upgrade Question regarding HP 255 G7 Laptop

Google is your friend. *Smile

This site shows the Samsung SSD listed above is an M2/2280, which is great news. In the comments after the video link posted above, it suggests the PC does or does not contain an M2 mount and if it does have the M2, it is capable of accepting an NVMe drive.

https://skinflint.co.uk/samsung-ssd-...-a1680862.html


Some will suggest that the NVMe subjective performance isn't much faster than SATA but the specs are clear.
The interface for sata 3 is 600Mbps while an NVMe is about 5 times that speed.


Check this; Samsung 970 Evo 1 TB M.2-2280 NVME Solid State Drive (MZ-V7E1T0BW) - PCPartPicker


One last check for piece of mind.

Open an Admin cmd and enter the following;

Code:

 

Questions regarding sysprep and capture in MDT

I have a question regarding the sysprep and capture function in MDT 2013.

I have done a sysprep & capture on a Windows 10x64 machine with software and drivers included using MDT.

So the next step I did was to deploy the captured .iso file onto a new machine which had the usual configuration steps including setting up the computer name, timezone and keyboard layout etc and everything was start up fine and all the software and drivers were also configured & installed properly.

However, the issue is that machine's SID and computer name were completely the same as the one I ran the sysprep & capture on. Was this supposed to be like this? Because I did some research and a sysprep is supposed to change the SID as it is treated as a new machine. Also, I did configure a new computer name for the machine during the deployment setup but I have no idea why its the same name as the other machine.
I would appreciate any answers given. Thank you.