Windows 10: Random BSOD - IRG_NOT_LESS_OR_EQUAL

Hi, attached are two zip files.
Did them 3 min apart, but the first one is twice the size, that'is why I decided to upload them both.

Thanks in advance for your help.

:)

 

ntoskrnl.exe+1640e0 BSOD error

So far, with one memory chip no BSOD. But, getting a BSOD would be random and infrequent.

I've went through that article in the past and still have gotten BSOD.

 

DISM, Windows Reset/Refresh not working.

Faulty RAM can give rise to 'random' blue screens (BSODs).

 

Hi Petar Stoychev,

Please test your memory using MemTest86+
If MemTest86+ comes with zero errors, run driver verifier to attempt to find drivers.
Note that driver verifier sometimes doesn't show any driver in the dumps, this is the reaon why driver verifier may need to be enabled a few times.





Diagnostic Test

RAM TEST


Run MemTest86+ - Test RAM - Windows 10 Forums



Note



MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.




Diagnostic Test

DRIVER VERIFIER


Warning Please make a backup of your important files and get your rescue media or create one.
Please create a restore point.
Please follow this tutorial to run driver verifier.

Driver verifier stresses your drivers and will crash your pc if any driver fails due to a violation.

Driver verifier should be performed for a max of 48 hours, or when you have a bluescreen, whatever comes first.

If driver verifier has found a violation and you can't get back into windows normally, try to boot into safe mode and reset in safe mode driver verifier, or in the troubleshooting options open command prompt and type verifier /reset.



Note Your system will act very sluggishly while driver verifier is enabled, this is normal as your drivers will be being subjected to heavy testing in order to make them crash.
Code: Probably caused by : memory_corruption[/quote]

 

Hi,

Memtest did 12 clean passes.


The computer started normally after running driver verifier with the required settings.

Here is another set of logs with crashes under verifier.

 

Please check the manufacturer of your mainboard, ECS, for BIOS updates
ECS > GF7050VT-M5 (V1.0/V1.0A)

Code: BiosMajorRelease = 8 BiosMinorRelease = 15 BiosVendor = American Megatrends Inc. BiosVersion = 080015 BiosReleaseDate = 12/05/2007[/quote]