Windows 10: Random BSOD ntoskrnl, ntkrnlmp executables

I have a Lenovo laptop with the following specs:


Intel Core i7-8550U 4C / 8T, 1.8 / 4.0GHz, 8MB

Integrated Intel UHD Graphics 620

Intel SoC Platform

16GB Soldered DDR4-2400

512GB SSD M.2 2280 PCIe NVMe

13.9" UHD 3840x2160 IPS 300nits Glossy


I started getting random BSOD a few weeks ago and have reset/reformatted to try and eliminate things. I have virtually no programs on the system aside from Word/Citrix and crashes intermittently occurred even prior to their installations from what I recall. System is stock, no overclocking or mods--only a few months old. Used for business, nothing hardware-intensive. Crashes have happened with just a browser open, youtube running, or a word/pdf doc open. Nothing specific.


I've run all the memory/sfc/disk checks built into Windows without errors. I have run memtest without any errors only for 1 hour though, so planning to run a longer course tonight. Enabled driver verification which immediately put me into a BSOD loop but was able to get out via safe mode. I'm attaching my dump and mini dump files. I've analyzed them as best I can but can't identify the root. There have been errors ranging from IQRL to memory management to page faults and system thread exceptions. Some seem more significant than others.


Dump zip attached gdrive:

https://tinyurl.com/y764sj3t

:)

 

Ntoskrnl BSOD

• Update your Realtek audio driver.
• Update your computer.
• Disable overclocking settings.
• Turn off BlueStacks/ another Android emulator.
• Clean your registry.
• Check your disk for errors.
• Fix bad memory issues.
• Remove faulty sticks of RAM.
• I hope these methods help you!
• Regards,
• Lewis
  
  * Added by Moderator: Information from
  https://windowsreport.com/windows-8-bsod-ntoskrnl-exe/
  
  * Moderator note: Advice given on this page might or might not be safe and/or effective but there are programs usually classified as PUP's (Potentially Unwanted Programs) being pushed that should not be downloaded or installed.
  

 

BSOD's have returned! [ntkrnlmp, ntoskrnl] HYPERVISOR error

Hello all, its nice to be back!
I've had a couple threads in the forum which regard my issues with BSODs the last being around 5 months ago from now and the other a bit longer. Though generally the errors have been consistent but has dipped in frequency with the help I received (thanks!) Since my last post, I have had near to no blue screens but am getting the odd few this past month, and judging by WhoCrashed, the modules which seem to cause it have been the same ever since.
In summary, here's what has been done:

I have my doubts on what may have caused the current one and here is what WhoCrashed states:

Code:

 

Webcam Triggering 'Attempted Execute Of No Execute Memory' BSOD - Windows 10

Hi,

Thank you for contacting Microsoft Community.

ATTEMPTED EXECUTE OF NOEXECUTE MEMORY Blue Screen of Death error appears when a device driver attempts to execute a program from a non-executable area of the memory. An error in the RAM (Random Access Memory) can also cause this BSOD error.

If you are using a built-in webcam, then, update the webcam driver and check if that helps.

• Press 'Windows key + X' and choose 'Device Manager'.
• Under 'Imaging devices', right-click on the webcam driver and update the driver.

Also I suggest you to follow the steps from the below article and check if it helps.

Troubleshoot blue screen errors

http://windows.microsoft.com/en-us/windows-10/troubleshoot-blue-screen-errors

Hope this information is helpful and do let us know if you need further assistance. We will be glad to assist.