Windows 10: Random BSOD with different error codes recently

Hello all,Over the last few weeks, I've been having lots of seemingly random BSODs on my Windows 10 machine Version 21H2 build 19044.1469.Reading online, I found that most websites suggest a driver issue, so I updated all my drivers and still observe the problem. I updated Windows too naturally.If I were to guess what could have caused it, I would say it somehow started happening around the same time that I switched from using IDE to using AHCI for my NVMe SSD Samsung 970 EVO Plus, since Samsung Magician was reporting that I was using the wrong drivers. I don't know why it was not already

:)

 

Random BSODS With different Bsod codes


System specsSony Vaio Sve15136
OS win 10 single language 64 bit
Processor Intel core i5
RAM 4gb
Graphics AMD Radeon HD 7650M
I recently upgraded to win 10 .Now getting random bsods with different codes although drivers seem to work fine.

 

BSOD with differents error code

hi, im just finished all these steps, but after the restart suddenly my pc is having another BSOD with error code KERNEL_MODE_HEAP_CORRUPTION. This is not the first time it happens, before this, im trying a several guide to fix my BSOD, whenever i finished
it, it seems like my pc having another BSOD with different error code. Here's the new minidump files :

https://drive.google.com/file/d/12XpiqTZne3i3foGhQ7C8gLHeF6IRwoqB/view?usp=sharing

Thanks for ur response

 

BSOD during gaming, plethora of different error codes!

Hello and welcome to TenForums

The log files that you provided only show one crash dump file so there is not a lot of information to go on. Furthermore the bugcheck code is not one I have ever seen before!

The stack recorded in the dump includes some references to storage and the analysis suggests memory corruption and so with nothing else to go on I would suggest that you do a check on the hard disk and RAM. This maybe the same as you have already run but it would be good to see the results.

Try CHKDSK
using option 3
Then



Diagnostics Test [/i] HDD TEST
*Arrow Run HDTune to

• check the health,
• scan for errors, no quick scan but full scan
• run a benchmark.

It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following

• the health,
• the error scan,
• the benchmark incl. following
  • transfer rate,
  • access time,
  • burst rate,
  • cpu usage.

Similarly with a memory test it would be good to post the results after you have run memtest86+ for a minimum of 8 passes

You indicated that many more crashes have occurred, however, they are not being recorded. Please make sure that your system is setup to record crash dump files: Configure Windows 10 to Create Minidump on BSOD

If the BSOD errors are all different it does tend to suggest a hardware problem. Sorry I can't be more helpful.