Windows 10: Random Reboot with No BSOD

So for a couple of months ago, my house is having a short power outage problem that happens quite frequently when I'm playing games.

I have a UPS for 2 years to handle a sudden power outage and it usually works well. But unfortunately, the game that I play a lot right now is Battlefield 1 and it requires a load amount of power that my UPS can't even handle it. So it's no use basically *Sad

The random reboot happens when in sleep mode. I usually leave my PC on at night to update my games. When i started it in the morning, the PC just restarting with no BSOD
The random reboot also happens when i start the PC after the short power outage gone. It started normally for a few minutes, i can open Chrome and else. Then, my screen will freeze and the PC will reboot with no BSOD too.

I've attached all the minidumps from when it happen in August up until now. I hope you guys can pinpoint where and what the problem is.
Also, this is my first time i post in TenForums, apologise if i haven't given enough info about the problem. Thanks!

:)

 

Dell Alienware X51 R2 BSOD, random reboots and crashes

Unfortunately the clean boot did not address my issue. I am still having random reboots. No BSOD during the clean boot mode, but I have had two random reboots, after which the computer turns itself on and off again in quick succession, before coming
back online.

 

windows 10 anniversary update

oops i also forgot to mention that the press enter and f8 things do not work ...the only way out of this screen is to hold power button for a soft off and then count to 10 and reboot.......it does reboot to normal windows till the bsod comes back and the
bsod is very random it doenst matter what i am doing on the puter at the time it just crashes

 

Hi cipherism,

Outside of the gaming part, can your UPS handle the outage properly when you are doing something on your pc?


Please fill in your system specsPlease follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely including PSU, cooling and other used stuff like mouse, keyboard, monitor, case, etc.
The PSU, cooling and other stuff are NOT mentioned in the tool.
In the left corner below in your post you find 'My System Specs'. After clicking it you can find a link a little below that says 'Update your System Spec', click on this link to get to the page where you can fill in your system specs.

 

Hi Axe,
Yes, my UPS can handle it well, no problem
Here is the detail for the UPS

And I've updated My Specs like you asked

 

A few questions

• Have you checked the PSU voltages in the BIOS and the PSU itself?
• Are there any overclocks present?
• Have you made any differences to the system before the crashes occured? I.e.,
  • driver installs,
  • software updates / repairs / installations (some install drivers),
  • hardware added or replaced,
  • BIOS changes

 

Like this ?




And also, i am getting a strange BSOD when i'm trying to quit BIOS, like this




But after that, my PC went normal. I dont know if its related to the problem

No

Here is the list of drivers/software updates





The only drivers that changes before the crash is SAMSUNG, i dont think i ever used it though.

Replace my old Samsung monitor with BenQ ZOWIE RL2455 and have no BIOS changes

 

You have an issue with the pagefile.

Check your virtual memory settings, old tutorial linked but its valid for Windows 10.
Make sure the allocated size of the pagefile is more than the recommended size if it is manually configured.
Also make sure it is allocated on the Windows partition.
Virtual Memory Paging File - Change

 

Hi Axe,

This is my Pagefile configuration currently




That's the default setting, i've never tweak any of it before and the Pagefile allocation is on Windows partition
Should i manually configure it ?

 

Try to delete the pagefile, reboot and configure the pagefile.

Delete pagefile
- Uncheck 'automatically manage paging file size on all drives'
- Select 'No paging file'
- Click 'Set' and reboot the system.

Configure the pagefile
- Check 'automatically manage paging file size on all drives'
- Reboot the system.

 

Okay, gonna try this method and see how it goes in couple days.
Thank you!